Tile Calculator
HoneyDoMath.com
Enter the area, the tile size, the grout joint and how many tiles come in a box, and get the whole tiles and boxes to buy, with a waste allowance you can change, rounded up once.
Estimates for planning, not professional advice. Read the full notice.
Example: a tiled floor
16 boxes of tiles
- Tiles to cover the area 109.46 tiles
- Tiles with the waste allowance 121 tiles
- Tiles left in the last box 7 tiles
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Tiles, by the box, boxes of tiles 16
Questions
How much extra tile should I allow for?
The waste allowance starts at a typical figure and you can change it. No standard sets one number, so use the allowance your layout, your tile and your supplier point to.
Does the grout joint change the number of tiles?
Yes, a little for large tiles and more for small ones. Each tile takes its own size plus the joint, so a wider joint means fewer tiles for the same area. The calculator uses the joint you type, and none if you leave it empty.
How many boxes do I need?
The calculator rounds the tiles up once, then divides by the tiles in a box and rounds up once more to whole boxes. The tiles per box are on your own tile label; the list holds only common counts.
Worked example: a tiled floor
Show the steps
- Area one tile takes, joint included 603 mm (1 ft 11 3/4 in) × 303 mm (11 15/16 in) = 0.1827 m² (1.9667 ft²)
- Tiles to cover the area 20 m² (215.28 ft²) ÷ 0.1827 m² (1.9667 ft²) = 109.46 tiles
- Add the waste allowance, once 109.46 tiles × 1.1 = 120.41 tiles
- Round up once, to whole tiles 120.41 tiles = 121 tiles
- Boxes: divide by the tiles in a box, round up once 121 tiles ÷ 8 = 16 boxes of tiles
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Tile waste allowance | 10% | |
| Default A typical allowance, not a figure from a standard. Change it to the allowance you want; check your tile label or supplier. | ||
| Grout joint width | 3 mm (1/8 in, converted) | |
| Default Your own joint width: check the spacing on your tile label or with your supplier. | ||
| Tiles per box | 8 tiles | |
| Default The tiles per box are on your tile label or your supplier's sheet; the list offers common counts. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm