Topsoil Calculator
HoneyDoMath.com
Enter the length, width and depth of your lawn or bed and get the topsoil in cubic metres and in litres, with every step of the math shown.
A ready-made setup of the Soil Calculator.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Area: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; farther with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 24 m² (258.33 ft²)
- Perimeter
- 20 m (65 ft 7 3/8 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a lawn patch
2.5 m³ (3.27 yd³) to order (2.4 m³ exact)
- The same volume in litres 2,400 L
- Cubic metres at the supplier's smallest order 2.5 m³ (88.29 ft³)
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Topsoil, 1 m³ (1.31 yd³) 2.5 m³ (3.27 yd³)
Questions
How do I work out how much topsoil I need?
Multiply the length and width in metres to get the area, then multiply by the depth in metres. A depth in millimetres is changed to metres first. The result is in cubic metres, and the calculator shows the same volume in litres.
What depth do I enter for topsoil?
That depends on the job and on your supplier, so the depth is yours to enter and this page quotes none. Change the depth and every figure on the page follows.
How many bags of topsoil do I need?
Divide the litres of topsoil you need by the size of the bag on its label, in litres, and round up once, to a whole bag. The bag size is yours to enter, because this page quotes no bag size.
How many litres are in a cubic metre?
The math above multiplies the cubic metres by the litres in one cubic metre, read from the units table, and shows the result as the litres line.
Worked example: a lawn patch
Show the steps
- Patch area 6 m (19 ft 8 1/4 in) × 4 m (13 ft 1 1/2 in) = 24 m² (258.33 ft²)
- Topsoil volume at the depth 24 m² (258.33 ft²) × 100 mm (3 15/16 in) (0.1 m) = 2.4 m³ (84.76 ft³)
- Litres: multiply by the litres in a cubic metre 2.4 m³ (84.76 ft³) × 1,000 L in a m³ = 2,400 L
- Round up once, to the supplier's smallest order 2.4 m³ (84.76 ft³) = 2.5 m³ (88.29 ft³)
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 0% | |
| Default No allowance unless you enter one. Check your label or supplier. | ||
| Supplier's smallest order, in cubic metres | 0.25 m³ (8.83 ft³, converted) | |
| Default Suppliers sell loose material in set amounts. This amount is a typed example: check your supplier. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Lawn and bed jobs
Topsoil in cubic metres and litres for lawn and bed jobs
| Job (size × depth) | Volume | Litres |
|---|---|---|
| Patch 3 m × 3 m × 100 mm | 0.9 m³ (31.78 ft³) | 900 L |
| Bed 3.6 m × 1.2 m × 150 mm | 0.65 m³ (22.88 ft³) | 648 L |
| Lawn 10 m × 8 m × 75 mm | 6 m³ (211.89 ft³) | 6,000 L |
Each row is worked out on its own, from the area and the depth. The sizes are examples to replace with your own, with no claim about what a lawn or bed needs.
Garden soil bag the maker prints
Rows: 1
The bag size for each garden soil listed, as the maker prints it
| Product | Printed by the maker |
|---|---|
| Garden Soil (all-purpose) | 25 L |
Figures in the Printed by the maker column are per Fafard's product page, checked 15 Nov 2026.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Source: [1]
These are the maker's own figures, shown as printed. The calculator above works from the sizes you type and uses nothing from this table.
Sources (1)
-
Garden Soil (all-purpose) (Fafard product page) (opens in new tab), Scotts Fafard, Product page, undated.
Manufacturer data.
“NPK 0.02-0.002-0.002 Format 25 litres”
Per Fafard's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.
Sources
- [1] Fafard, Garden Soil (all-purpose) (Fafard product page). Checked 15 November 2026. https://www.fafard.ca/products/soil-mixes-and-soils/outdoor-soil-mixes/garden-soil-all-purpose/