Gravel Calculator
HoneyDoMath.com
Enter the length, width and depth of the area and get the gravel or other aggregate in cubic metres, with every step of the math shown.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Area: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; farther with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 18 m² (193.75 ft²)
- Perimeter
- 18 m (59 ft 11/16 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a gravel area
1.5 t to order (1.4 t exact)
- Tonnes at the supplier's smallest order 1.5 t
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Gravel, 1 t 1.5 t
Questions
How do I work out how much gravel I need?
Multiply the length and width of the area in metres to get its area, then multiply by the depth in metres. A depth in millimetres is changed to metres first. The result is the volume in cubic metres, and the calculator shows every step.
Does this work for other aggregate?
Yes. The volume of a layer is the area multiplied by the depth, whatever the stone, so the same working fits gravel, crushed stone and other loose aggregate.
Can I order gravel by weight?
Suppliers often sell it by weight, and the weight of a cubic metre differs between materials. This page quotes no weight, so ask your supplier for the weight per cubic metre of your product and multiply it by the volume.
Why does the depth matter so much?
The volume grows in step with the depth, so a layer twice as deep needs twice the material. Enter the depth you intend to lay and the calculator works from that.
Worked example: a gravel area
Show the steps
- Area 6 m (19 ft 8 1/4 in) × 3 m (9 ft 10 1/8 in) = 18 m² (193.75 ft²)
- Gravel volume at the depth 18 m² (193.75 ft²) × 50 mm (1 15/16 in) (0.05 m) = 0.9 m³ (31.78 ft³)
- Tonnes: multiply by the weight per cubic metre 0.9 m³ (31.78 ft³) × 1,500 kg/m³ = 1.4 t
- Round up once, to the supplier's smallest order in tonnes 1.4 t = 1.5 t
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 0% | |
| Default No allowance unless you enter one. Check your label or supplier. | ||
| Weight of the material per cubic metre (an example, your own figure) | 1,500 kg/m³ | |
| Default A typed example, not a sourced figure for this material: replace it with the weight your supplier gives. Check your label or supplier. | ||
| Supplier's smallest order, in tonnes | 0.5 t | |
| Default Suppliers sell by the tonne in set amounts. This amount is a typed example: check your supplier. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Common jobs
Gravel in cubic metres for common jobs
| Job (size × depth) | Volume |
|---|---|
| Path 10 m × 1 m × 50 mm | 0.5 m³ (17.66 ft³) |
| Triangle 3 m base, 2 m high × 40 mm | 0.12 m³ (4.24 ft³) |
| Sub-base layer 3 m × 3 m × 100 mm | 0.9 m³ (31.78 ft³) |
Each row is worked out on its own, from the shape's area and the depth. The sizes are examples to replace with your own, with no claim about what a job needs.
Stone bags the maker prints
Rows: 4
The bag size and the area one bag covers for each stone product listed, as the maker prints them
| Product | Printed by the maker |
|---|---|
| Drainage Stone (2 cm (3/4 in)) | 18 kg (39.7 lb, converted) |
| Drainage Stone (2 cm (3/4 in)) | 0.2 m² (2.15 ft², converted) |
| White Marble stone | 18 kg (39.7 lb, converted) |
| White Marble stone | 0.2 m² (2.15 ft², converted) |
Figures in the Printed by the maker column are per Fafard's product page, checked 15 Nov 2026.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
These are the maker's own figures, shown as printed. The calculator above works from the sizes you type and uses nothing from this table.
Sources (2)
-
Drainage Stone (Fafard product page) (opens in new tab), Scotts Fafard, Product page, undated.
Manufacturer data.
“FORMAT 18 kg 2 cm (3/4 in) ; One 18 kg bag allows to cover approximately 0.20 m² (2 ft²)”
Per Fafard's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1) -
White Marble stone (Fafard product page) (opens in new tab), Scotts Fafard, Product page, undated.
Manufacturer data.
“One 18 kg bag allows to cover approximately 0.20 m² (2 ft²)”
Per Fafard's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.
Sources
- [1] Fafard, Drainage Stone (Fafard product page). Checked 15 November 2026. https://www.fafard.ca/products/ground-cover/aggregates/drainage-stone/
- [2] Fafard, White Marble stone (Fafard product page). Checked 15 November 2026. https://www.fafard.ca/products/ground-cover/aggregates/white-marble/