Thinset Calculator

Enter the area and pick the rate printed on your own bag of thinset, then the bag size, and get the kilograms and the bags to buy, rounded up once. The rates and bag sizes are typed examples, not a maker's range.

Estimates for planning, not professional advice. Read the full notice.

Area and thinset

Like 11 m²

reads as 20 square metres, 215.28 square feet

Example: a tiled floor

4 22.7 kg (50 lb) bags

  • Thinset for the area 80 kg (176.37 lb)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Thinset, 22.7 kg bag, 22.7 kg (50 lb) bag 4

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    Where do I find the rate?

    It is on the thinset's bag or data sheet, as a weight for each square metre, and it changes with the trowel notch and the tile. Pick the nearest value in the list or compare two rates side by side.

    Why one rate and not a range?

    This page counts the rate you pick, so the bags follow that figure exactly. If your label prints a range, try both ends and buy for the larger.

    Worked example: a tiled floor

    Show the steps
    1. Thinset: the area times the rate 20 m² (215.28 ft²) ÷ 1 m² (10.76 ft²) × 4 kg (8.82 lb) = 80 kg (176.37 lb)
    2. Bags: divide by the bag and round up once 80 kg (176.37 lb) ÷ 22.7 kg (50.04 lb) = 4 × 22.7 kg (50 lb) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Thinset rate (example) 4 kg/m²
    Default A typed set of rates, not a maker's figure. The rate depends on the tile, the trowel and the thinset: use the value on your bag.
    Bag size 22.7 kg (50 lb, converted)[1]
    MAPEI Canada's data sheet for Ultraflex 1 gives an approximate coverage per 22.7 kg bag of 6.97 to 8.36 m² with a 6 × 6 × 6 mm square-notch trowel and 5.11 to 6.04 m² with a 6 x 10 x 6 mm one.

    Adhesive coverage and bags by maker

    Rows: 16

    The bag size and the coverage of one bag that each maker prints for its thin-set or adhesive, one figure to a row, in the order of the sheet

    The bag size and the coverage of one bag that each maker prints for its thin-set or adhesive, one figure to a row, in the order of the sheet
    FigurePrinted value
    Kerabond, bag size 22.7 kg (50 lb, converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    Kerabond T, bag size 22.7 kg (50 lb, converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    Kerabond T, coverage of one bag with a 6x6x6 mm notch trowel, lower end 7.9 m² (85.03 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    Kerabond T, coverage of one bag with a 6x6x6 mm notch trowel, upper end 8.83 m² (95.05 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    Kerabond T, coverage of one bag with a 6x10x6 mm notch trowel, lower end 6.04 m² (65.01 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    Kerabond T, coverage of one bag with a 6x10x6 mm notch trowel, upper end 6.97 m² (75.02 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    MAPEI Ultraflex 1, bag size 22.7 kg (50 lb, converted) (per MAPEI's data sheet, checked 13 Nov 2026)
    MAPEI Ultraflex 1, coverage of one bag with a 6x6x6 mm notch trowel, lower end 6.97 m² (75.02 ft², converted) (per MAPEI's data sheet, checked 13 Nov 2026)
    MAPEI Ultraflex 1, coverage of one bag with a 6x6x6 mm notch trowel, upper end 8.36 m² (89.99 ft², converted) (per MAPEI's data sheet, checked 13 Nov 2026)
    MAPEI Ultraflex 1, coverage of one bag with a 6x10x6 mm notch trowel, lower end 5.11 m² (55 ft², converted) (per MAPEI's data sheet, checked 13 Nov 2026)
    MAPEI Ultraflex 1, coverage of one bag with a 6x10x6 mm notch trowel, upper end 6.04 m² (65.01 ft², converted) (per MAPEI's data sheet, checked 13 Nov 2026)
    Ultraflex LFT, bag size 22.7 kg (50 lb, converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    Ultraflex LFT, coverage of one bag with a 6x6x6 mm notch trowel, lower end 7.9 m² (85.03 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    Ultraflex LFT, coverage of one bag with a 6x6x6 mm notch trowel, upper end 8.83 m² (95.05 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    Ultraflex LFT, coverage of one bag with a 6x10x6 mm notch trowel, lower end 6.04 m² (65.01 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026)
    Ultraflex LFT, coverage of one bag with a 6x10x6 mm notch trowel, upper end 6.97 m² (75.02 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026)

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Sources: [2][3][1][4]

    Each figure is the one the maker's sheet prints, and a coverage holds for the trowel notch or the layer the sheet names. A rate option in the calculator is the bag's kilograms divided by the printed square metres, taking the lower end where the sheet prints a range.

    Sources (4)

    1. Ultraflex 1, technical data sheet (MAPEI Canada) (opens in new tab), MAPEI Inc., Technical data sheet (en-CA), edition not printed in the text read. Manufacturer data.
      “Approximate coverage per 50 lbs. (22.7 kg): 75 to 90 sq. ft. (6.97 to 8.36 m2) with 1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) square-notch”
      “55 to 65 sq. ft. (5.11 to 6.04 m2) with 1/4" x 3/8" x 1/4" (6 x 10 x 6 mm) square-notch”
      “Actual coverage will vary according to substrate profile and tile type.”
      Per MAPEI's data sheet, checked 13 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. Kerabond, technical data sheet (MAPEI Canada) (opens in new tab), MAPEI Inc., Technical data sheet (en-CA), edition not printed in the text read. Manufacturer data.
      “Packaging Size and Color Bag: 50 lbs. (22.7 kg), gray Bag: 50 lbs. (22.7 kg), white (p. 4)”
      Per MAPEI's data sheet, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
    3. Kerabond T, technical data sheet (MAPEI Canada) (opens in new tab), MAPEI Inc., Technical data sheet (en-CA), edition not printed in the text read. Manufacturer data.
      “Packaging Size and Color Bag: 50 lbs. (22.7 kg), gray Bag: 50 lbs. (22.7 kg), white (p. 6)”
      “Approximate Coverage** per 50 lbs. (22.7 kg) Typical Trowel Coverage 1/4" x 1/4" x 1/4" (6 x 6 x 6 mm), square-notch 85 to 95 sq. ft. (7.90 to 8.83 m²) (p. 5)”
      “Approximate Coverage** per 50 lbs. (22.7 kg) ... 1/4" x 3/8" x 1/4" (6 x 10 x 6 mm), square-notch 65 to 75 sq. ft. (6.04 to 6.97 m²) (p. 5)”
      Per MAPEI's data sheet, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 3)
    4. Ultraflex LFT, technical data sheet (MAPEI Canada) (opens in new tab), MAPEI Inc., Technical data sheet (en-CA), edition not printed in the text read. Manufacturer data.
      “Packaging Size and Color Bag: 50 lbs. (22.7 kg), gray Bag: 50 lbs. (22.7 kg), white (p. 6)”
      “Approximate Coverage per 50 lbs. (22.7 kg) Typical Trowel Coverage 1/4" x 1/4" x 1/4" (6 x 6 x 6 mm), square-notched trowel 85 to 95 sq. ft. (7.90 to 8.83 m²) (p. 6)”
      “Approximate Coverage per 50 lbs. (22.7 kg) ... 1/4" x 3/8" x 1/4" (6 x 10 x 6 mm), square-notched trowel 65 to 75 sq. ft. (6.04 to 6.97 m²) (p. 6)”
      Per MAPEI's data sheet, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 4)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.