Roof Area Calculator

Enter the footprint of the house and the roof pitch in degrees and get the roof area in square metres, with the length of each edge, for a gable, hip or shed roof, and the bundles of asphalt shingles, from the area the maker prints for one bundle of the shingles you choose, or from your own figure. The working is shown for an example.

Estimates for planning, not professional advice. Read the full notice.

Roof footprint

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 10 metres, 32 feet 9 and 11 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 8 metres, 26 feet 2 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Like 11 m²

Example: a gable roof

92.38 m² (994.33 ft²)

  • Eave length 20 m (65 ft 7 3/8 in)
  • Rake length 18.475 m (60 ft 7 3/8 in)
  • Ridge length 10 m (32 ft 9 11/16 in)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Asphalt shingle bundles 33

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How do I work out the area of a pitched roof?

    Multiply the footprint by the pitch multiplier for the pitch in degrees. The example shows the footprint, the multiplier and the area.

    How many bundles of shingles do I need?

    Add the waste allowance to the roof area once, divide by the area one bundle covers and round up once. The page uses the area the maker prints for one bundle of the shingles chosen in the list, starting with IKO Cambridge; for shingles not in the list, type the figure printed on their bundle. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by IKO or BP Canada.

    Worked example: a gable roof

    Show the steps
    1. Footprint: length times width 10 m (32 ft 9 11/16 in) × 8 m (26 ft 2 15/16 in) = 80 m² (861.11 ft²)
    2. Pitch multiplier for the pitch in degrees 30 degrees = 1.1547
    3. Roof area: footprint times the pitch multiplier 80 m² (861.11 ft²) × 1.1547 = 92.38 m² (994.33 ft²)
    4. Add the waste allowance, once 92.38 m² (994.33 ft²) + 10% waste = 101.61 m² (1,093.76 ft²)
    5. Bundles: divide by the area one bundle covers, then round up once 101.61 m² (1,093.76 ft²) ÷ 3.1 m² (33.37 ft²) = 33 bundles of roofing

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance, simple roof 10%
    Default Your own allowance, added once to the total. Check your label or supplier.
    Waste allowance, hip roof 15%
    Default Your own allowance, added once to the total. Check your label or supplier.
    Area one bundle of IKO Cambridge shingles covers, as IKO prints it 3.1 m²[1]
    IKO's data sheet for Cambridge shingles prints a coverage of 3.1 m² per bundle and 9.29 m² for three bundles, with 20 shingles per bundle.

    Area one bundle covers, by shingle

    Rows: 3

    The area one bundle covers, for each shingle the calculator offers, as its maker prints it

    The area one bundle covers, for each shingle the calculator offers, as its maker prints it
    ShingleArea one bundle covers
    IKO Cambridge 3.1 m² (per IKO's data sheet, checked 13 Nov 2026)
    BP Mystique 42 3.06 m² (per BP Canada's product page, checked 15 Nov 2026)
    BP Signature West 3.06 m² (per BP Canada's product page, checked 15 Nov 2026)

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Sources: [1][2][3]

    The list is in the order the calculator offers it, the starting shingle first. The figure on your own bundle comes first.

    Sources (3)

    1. Cambridge architectural shingles, technical data sheet (IKO North America) (opens in new tab), IKO Industries Ltd., Technical data sheet 4220XXX (English; the North American sheet for Canada and the US). Manufacturer data.
      “COVERAGE/BUNDLE 33.3 ft.2 (3.1 m2)”
      “COVERAGE/THREE BUNDLES 100 ft.2 (9.29 m2)”
      “SHINGLES/BUNDLE 20”
      Per IKO's data sheet, checked 13 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. Mystique 42 (BP Canada product page) (opens in new tab), BP Canada, Product page, undated. Manufacturer data.
      “Coverage 3.06 m² (32.9 ft²) Exposure 152mm (6 in) Dimensions 1067 mm x 356 mm (42 in x 14 in) Shingles/Bundle 19”
      Per BP Canada's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
    3. Signature West (BP Canada product page) (opens in new tab), BP Canada, Product page, undated. Manufacturer data.
      “3.06 m2 (32.9 ft2) / 152 mm (6 in) / 1 067 mm × 356 mm (42 in × 14 in)”
      Per BP Canada's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 3)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.