Shower Tile Calculator
HoneyDoMath.com
Enter the widths and height of the shower walls, an optional niche and the floor, and get wall tiles and floor tiles as two separate counts in boxes, with a waste allowance you can change.
A ready-made setup of the Tile Calculator.
Estimates for planning, not professional advice. Read the full notice.
Example: a shower enclosure
6 boxes of tiles
- Wall area to tile 7.92 m² (85.25 ft²)
- Floor area to tile 1.35 m² (14.53 ft²)
- Wall tiles with the waste allowance 48 tiles
- Floor tiles with the waste allowance 17 tiles
- Floor tiles, by the box 2 boxes of tiles
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Wall tiles, by the box, boxes of tiles 6
- Floor tiles, by the box, boxes of tiles 2
Questions
Do I tile the inside of the niche?
If you give the niche's width, height and depth, the calculator counts its back, two sides, top and bottom as tiled area and takes the opening off the wall. Leave the niche empty and the wall is one flat surface.
Why are wall tiles and floor tiles counted separately?
They are usually different tiles with different sizes and boxes, so each gets its own area, its own waste allowance and its own box count. Both counts appear in the result and in the shopping list.
Worked example: a shower enclosure
Show the steps
- Wall width in all 1.5 m (4 ft 11 1/16 in) + 900 mm (2 ft 11 7/16 in) + 900 mm (2 ft 11 7/16 in) = 3.3 m (10 ft 9 15/16 in)
- Wall area: width times height 3.3 m (10 ft 9 15/16 in) × 2.4 m (7 ft 10 1/2 in) = 7.92 m² (85.25 ft²)
- Floor area: length times width 1.5 m (4 ft 11 1/16 in) × 900 mm (2 ft 11 7/16 in) = 1.35 m² (14.53 ft²)
- Wall tiles with the joint and the waste allowance, rounded up once 7.92 m² (85.25 ft²) = 48 tiles
- Wall boxes, rounded up once 48 tiles ÷ 8 = 6 boxes of tiles
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Tile waste allowance | 10% | |
| Default A typical allowance, not a figure from a standard. Change it to the allowance you want; check your tile label or supplier. | ||
| Grout joint width | 3 mm (1/8 in, converted) | |
| Default Your own joint width: check the spacing on your tile label or with your supplier. | ||
| Tiles per box | 8 tiles | |
| Default The tiles per box are on your tile label or your supplier's sheet; the list offers common counts. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm