Flooring Calculator

Enter the room's length and width, the coverage printed on the box and a waste allowance to get the boxes of flooring to buy and what is left over, rounded up once. Work in metres and square metres.

Estimates for planning, not professional advice. Read the full notice.

Room and box

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.2 metres, 13 feet 9 and 3 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.6 metres, 11 feet 9 and 3 quarters inches

Like 11 m²

reads as 2.2 square metres, 23.68 square feet

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Example: a bedroom floor

8 boxes of flooring

  • Floor area 15.12 m² (162.75 ft²)
  • Area with the waste allowance, before rounding 16.63 m² (179.03 ft²)
  • Flooring bought 17.6 m² (189.44 ft²)
  • Bought beyond the floor's own area 2.48 m² (26.69 ft²)
  • Flooring, by the box, boxes of flooring 8

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How much extra flooring should I buy?

    The waste allowance is your own figure, started at a typical allowance for a straight layout. The calculator adds it once to the floor area and rounds up once to whole boxes. A diagonal or herringbone layout takes more, so enter your own figure.

    How many boxes of flooring do I need for a four by four metre room?

    The table of common room sizes shows the boxes for several rooms at an example box coverage. Box coverage differs by product, so enter the coverage from your own label for your count.

    Does the expansion gap change the number of boxes?

    No. The gap is shown as your own input and is not taken off the floor area, so the count follows the room's full area.

    Worked example: a bedroom floor

    Show the steps
    1. Area: length times width 4.2 m (13 ft 9 3/8 in) × 3.6 m (11 ft 9 3/4 in) = 15.12 m² (162.75 ft²)
    2. Add the waste allowance, once 15.12 m² (162.75 ft²) × 1.1 = 16.63 m² (179.03 ft²)
    3. Divide by the coverage of one box 16.63 m² (179.03 ft²) ÷ 2.2 m² (23.68 ft²) = 7.56 boxes
    4. Round up once, to whole boxes 7.56 boxes = 8 boxes of flooring

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 10%
    Default A typical allowance for a straight layout, added once. It is your own figure: change it for your layout.
    Coverage of one box No default
    Default From the box label. Check your label or supplier.
    Plank size No default
    Default It does not change the count, which follows the box coverage. Check your label or supplier.
    Expansion gap No default
    Default Shown for your own layout; it does not change the box count. Check your label or supplier.

    Boxes for common room sizes

    Boxes for common room sizes at an example box coverage, with the waste allowance added once

    Boxes for common room sizes at an example box coverage, with the waste allowance added once
    RoomFloor areaBoxes at 2.2 m² a box (example)
    3 × 3 m 9 m² (96.88 ft²)5
    3 × 4 m 12 m² (129.17 ft²)6
    4 × 4 m 16 m² (172.22 ft²)8
    4 × 5 m 20 m² (215.28 ft²)10
    5 × 6 m 30 m² (322.92 ft²)15
    6 × 8 m 48 m² (516.67 ft²)24

    The box coverage is an example, not a product's. Your own label gives the real coverage, so enter it in the field above for your count.

    Underlay rolls TORLYS lists

    Rows: 2

    The coverage of one roll for each flooring underlay roll size TORLYS prints on its accessories page

    The coverage of one roll for each flooring underlay roll size TORLYS prints on its accessories page
    Underlay rollCoverage of one roll
    TORLYS flooring underlay roll, 2.2 mm × 0.91 m × 10.16 m 9.29 m² (100 ft², converted)
    TORLYS flooring underlay roll, 2.4 mm × 1.22 m × 15.24 m 18.58 m² (199.99 ft², converted)

    Figures in the Coverage of one roll column are per TORLYS' product page, checked 15 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [1]

    Each roll size and its coverage are shown as TORLYS prints them. The calculator counts boxes of flooring and does not count underlay rolls.

    Sources (1)

    1. Smart Floors accessories (TORLYS product page) (opens in new tab), TORLYS, Product page, undated. Manufacturer data.
      “Dimensions: 3/32” x 3’ x 33’4” (nominal) / 2.2mm x 0.91m x 10.16m Rolls: 100 sq. ft. (9.29m2)”
      “Dimensions: 3/32” x 4’ x 50’ (nominal) / 2.4mm x 1.22m x 15.24m Rolls: 200 sq. ft. (18.58m2)”
      Per TORLYS' product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.