Siding Calculator

Enter the length, width and wall height of the house, its gable ends with their pitch, and every door and window, and get siding boards or panels, opening trim, corner posts and a starter strip, with waste added once and each product rounded up once. The math is shown for an example.

Estimates for planning, not professional advice. Read the full notice.

House and siding sizes

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 12 metres, 39 feet 4 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 8 metres, 26 feet 2 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.5 metres, 8 feet 2 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 900 millimetres, 2 feet 11 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.1 metres, 6 feet 10 and 11 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 1.2 metres, 3 feet 11 and 1 quarter inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 1.2 metres, 3 feet 11 and 1 quarter inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4 metres, 13 feet 1 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.2 metres, 7 feet 2 and 5 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.6 metres, 11 feet 9 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 150 millimetres, 5 and 7 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 metres, 9 feet 10 and 1 eighth inches

Example: a house in wood siding

189 siding boards

  • Net wall area 92.35 m² (994.05 ft²)
  • Opening trim pieces 9 opening trim pieces
  • Corner posts 4 corner posts
  • Starter strip pieces 14 starter strips

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Siding pieces, Siding boards 189
  • Opening trim, Opening trim pieces 9
  • Corner posts 4
  • Starter strip, Starter strip pieces 14

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How much siding does a house need?

    Take the net wall area, add the waste allowance once, and divide by the area one piece covers. The calculator never rounds the area before dividing; it rounds the piece count up once at the end.

    How do I deduct windows and doors?

    Enter each opening at its own size. The calculator takes the area of every door, window and large door off the gross wall once, and asks again if an opening is taller than the wall or wider than the longest wall.

    Does a panel need a different count from a board?

    Only the area one piece covers changes. A panel can show more than one course, so its coverage is its length times the courses times the exposure. Check the piece length and exposure on your own label or with your supplier.

    Worked example: a house in wood siding

    Show the steps
    1. Gross wall: the distance around the house times the wall height 40 m (131 ft 2 13/16 in) × 2.5 m (8 ft 2 7/16 in) = 100 m² (1,076.39 ft²)
    2. Openings: every door and window at its own size 7.65 m² (82.34 ft²) = 7.65 m² (82.34 ft²)
    3. Net wall: gross wall less the openings 100 m² (1,076.39 ft²) − 7.65 m² (82.34 ft²) = 92.35 m² (994.05 ft²)
    4. Add the waste allowance, once, to the net wall 92.35 m² (994.05 ft²) + 10% waste = 101.59 m² (1,093.45 ft²)
    5. Divide by the area one piece covers: its length times the exposure 101.59 m² (1,093.45 ft²) ÷ 0.54 m² (5.81 ft²) = 188.12 pieces
    6. Round up once, to whole pieces 188.12 pieces = 189 siding boards

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 10%
    Default Your own allowance, added once to the total. Check your label or supplier.

    Vinyl siding by maker

    Rows: 1

    The panel length, the panels in a box and the coverage of a box that each maker prints, with the boxes for the example house

    The panel length, the panels in a box and the coverage of a box that each maker prints, with the boxes for the example house
    ProductPanel lengthPanels in a boxCoverage of one boxBoxes for the example house
    D4 Verona vinyl siding (code 0125; D4D 0126 same figures) 12'-6"2418.58 m² (200 ft², as published)6

    Figures in the Panel length, Panels in a box and Coverage of one box columns are per Kaycan's product page, checked 14 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [1]

    The panel length, the count and the coverage are the maker's printed figures. Each row is worked out on its own for the example house with the waste allowance added once, rounded up once to whole boxes.

    Wood siding by maker

    Rows: 1

    The dimensions and the lengths a maker prints, as ranges, for its wood siding

    The dimensions and the lengths a maker prints, as ranges, for its wood siding
    ProductDimensions, millimetresLengths, feet
    Canfor Rocky Mountain Douglas-fir & Western Larch siding (Square / Bevel profile) 25 – 908 – 16

    Figures in the Dimensions, millimetres and Lengths, feet columns are per Canfor's product page, checked 15 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [2]

    The ranges are shown as the maker prints them. The maker's page does not say which dimension the range is, so no count is worked out.

    Sources (2)

    1. The Verona collection, D4 vinyl siding (Kaycan product page) (opens in new tab), Kaycan, Product page, undated. Manufacturer data.
      “Area per box: 200 sq ft. Number of panels per box: 24 Length : 12'-6"”
      Per Kaycan's product page, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. Siding (Canfor product page) (opens in new tab), Canfor, Product page, undated. Manufacturer data.
      “Square Profile ... Dimensions Millimetres 25 – 90 Lengths Feet 8 – 16”
      Per Canfor's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.