Stair Calculator

Enter the total rise of your staircase and your own target riser height, and get the number of risers, the rise of each, the treads, the run and the length of the string, with every step of the math shown.

Estimates for planning, not professional advice. Read the full notice.

Stair size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.7 metres, 8 feet 10 and 5 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 280 millimetres, 11 inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 190 millimetres, 7 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 25 millimetres, 1 inch

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 900 millimetres, 2 feet 11 and 7 sixteenths inches

Your own board length; leave it empty to buy the pieces cut to length.

Risers

Example: Stair layout

Summary

Risers
15 × 180 mm
Treads
14 × 280 mm
Total run
3,920 mm
Stringer (longest side)
4,660 mm
Bottom riser reduction
155 mm

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

Stair layout

Marks from the start

MarkReadsFrom
Riser 1180 mmthe floor
Riser 2360 mmthe floor
Riser 3540 mmthe floor
Riser 4720 mmthe floor
Riser 5900 mmthe floor
Riser 61,080 mmthe floor
Riser 71,260 mmthe floor
Riser 81,440 mmthe floor
Riser 91,620 mmthe floor
Riser 101,800 mmthe floor
Riser 111,980 mmthe floor
Riser 122,160 mmthe floor
Riser 132,340 mmthe floor
Riser 142,520 mmthe floor
Riser 152,700 mmthe floor
Tread 1280 mmthe first riser
Tread 2560 mmthe first riser
Tread 3840 mmthe first riser
Tread 41,120 mmthe first riser
Tread 51,400 mmthe first riser
Tread 61,680 mmthe first riser
Tread 71,960 mmthe first riser
Tread 82,240 mmthe first riser
Tread 92,520 mmthe first riser
Tread 102,800 mmthe first riser
Tread 113,080 mmthe first riser
Tread 123,360 mmthe first riser
Tread 133,640 mmthe first riser
Tread 143,920 mmthe first riser

Drawing

Side view of the stringer

A saw-tooth outline of 15 risers and 14 treads. The mark table lists every mark.

Scale 1:25 when printed at 100% (actual size).

Check this bar with a ruler: 100 mm.

Example: a staircase with a cut stringer

3 Stringers, cut to 4.661 m

  • Stringers 3 Stringers, cut to 4.661 m
  • Treads 14 Treads, cut to 0.9 m
  • Stringers, Stringer, cut to 4.661 m 3
  • Treads, Tread, cut to 0.9 m 14

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many risers does my staircase have?

    Divide the total rise by the maximum riser height you set and round up to a whole number of risers. The rise of each riser is the total rise divided by that number. The floor above is the top step, so there is one tread fewer than there are risers.

    How long is the stringer?

    The stringer is the longest side of a right-angled triangle. Its short sides are the rise below the top riser and the total run. The calculator shows the math and the angle the stringer makes.

    Why is the stringer cut down at the bottom?

    The first tread sits on top of the bottom cut of the stringer and adds its own thickness. The bottom is cut down by the rise of a riser minus the tread thickness, so the first riser is the same height as the rest.

    Which rise and run does the calculator use?

    Only the sizes you enter. It holds no fixed values and compares nothing with a limit: the maximum riser height and the run are your own choice.

    Where do the code figures on this page come from?

    They are quoted from the National Building Code of Canada 2020, which the National Research Council publishes free of charge. Each province and territory adopts the model code with its own changes, so the figures for your stairs come from your local building department.

    Can I print the marks?

    Yes. The page lists every mark from the floor and from the first riser, so you can print them and transfer them to the board.

    Worked example: a staircase with a cut stringer

    Show the steps
    1. Risers: divide the total rise by the maximum riser height, then round up 2.7 m (8 ft 10 5/16 in) ÷ 190 mm (7 1/2 in) = 15 risers
    2. Riser height: the total rise divided by the number of risers 2.7 m (8 ft 10 5/16 in) ÷ 15 risers = 180 mm (7 1/16 in)
    3. Treads: one fewer than the risers, because the floor above is the top step 15 risers − 1 = 14 treads
    4. Total run: the number of treads times the run 14 treads × 280 mm (11 in) = 3.92 m (12 ft 10 5/16 in)
    5. Rise below the top riser: the total rise minus one riser 2.7 m (8 ft 10 5/16 in) − 180 mm (7 1/16 in) = 2.52 m (8 ft 3 3/16 in)
    6. Stringer: the longest side of a right-angled triangle whose short sides are that rise and the total run 2.52 m (8 ft 3 3/16 in) = 4.66 m (15 ft 3 1/2 in)
    7. Bottom riser reduction: the riser minus the tread thickness 180 mm (7 1/16 in) − 25 mm (1 in) = 155 mm (6 1/8 in)

    Marks for this example

    Where to mark each riser and each run, measured from the floor and from the first riser

    Where to mark each riser and each run, measured from the floor and from the first riser
    MarkMeasurement
    Riser 1, from the floor 180 mm (7 1/16 in)
    Riser 2, from the floor 360 mm (1 ft 2 3/16 in)
    Riser 3, from the floor 540 mm (1 ft 9 1/4 in)
    Riser 4, from the floor 720 mm (2 ft 4 3/8 in)
    Riser 5, from the floor 900 mm (2 ft 11 7/16 in)
    Riser 6, from the floor 1.08 m (3 ft 6 1/2 in)
    Riser 7, from the floor 1.26 m (4 ft 1 5/8 in)
    Riser 8, from the floor 1.44 m (4 ft 8 11/16 in)
    Riser 9, from the floor 1.62 m (5 ft 3 3/4 in)
    Riser 10, from the floor 1.8 m (5 ft 10 7/8 in)
    Riser 11, from the floor 1.98 m (6 ft 5 15/16 in)
    Riser 12, from the floor 2.16 m (7 ft 1 1/16 in)
    Riser 13, from the floor 2.34 m (7 ft 8 1/8 in)
    Riser 14, from the floor 2.52 m (8 ft 3 3/16 in)
    Riser 15, from the floor 2.7 m (8 ft 10 5/16 in)
    Tread 1, from the first riser 280 mm (11 in)
    Tread 2, from the first riser 560 mm (1 ft 10 1/16 in)
    Tread 3, from the first riser 840 mm (2 ft 9 1/16 in)
    Tread 4, from the first riser 1.12 m (3 ft 8 1/8 in)
    Tread 5, from the first riser 1.4 m (4 ft 7 1/8 in)
    Tread 6, from the first riser 1.68 m (5 ft 6 1/8 in)
    Tread 7, from the first riser 1.96 m (6 ft 5 3/16 in)
    Tread 8, from the first riser 2.24 m (7 ft 4 3/16 in)
    Tread 9, from the first riser 2.52 m (8 ft 3 3/16 in)
    Tread 10, from the first riser 2.8 m (9 ft 2 1/4 in)
    Tread 11, from the first riser 3.08 m (10 ft 1 1/4 in)
    Tread 12, from the first riser 3.36 m (11 ft 5/16 in)
    Tread 13, from the first riser 3.64 m (11 ft 11 5/16 in)
    Tread 14, from the first riser 3.92 m (12 ft 10 5/16 in)

    Each mark is worked out from the whole rise or the whole run and rounded only at the end. Marks are never added up from the rounded rise of one riser, because that drifts out of line.

    Stairs for a range of total rises

    Riser height, risers, treads, total run and stringer for a range of total rises, with the run of this example

    Riser height, risers, treads, total run and stringer for a range of total rises, with the run of this example
    Total riseRiser heightRisersTreadsTotal runStringer
    1.2 m (3 ft 11 1/4 in) 171.4 mm (6 3/4 in)7 risers6 treads1.68 m (5 ft 6 1/8 in)1.97 m (6 ft 5 9/16 in)
    1.8 m (5 ft 10 7/8 in) 180 mm (7 1/16 in)10 risers9 treads2.52 m (8 ft 3 3/16 in)2.996 m (9 ft 9 15/16 in)
    2.4 m (7 ft 10 1/2 in) 184.6 mm (7 1/4 in)13 risers12 treads3.36 m (11 ft 5/16 in)4.025 m (13 ft 2 7/16 in)
    2.6 m (8 ft 6 3/8 in) 185.7 mm (7 5/16 in)14 risers13 treads3.64 m (11 ft 11 5/16 in)4.368 m (14 ft 3 15/16 in)
    2.75 m (9 ft 1/4 in) 183.3 mm (7 3/16 in)15 risers14 treads3.92 m (12 ft 10 5/16 in)4.686 m (15 ft 4 1/2 in)
    3 m (9 ft 10 1/8 in) 187.5 mm (7 3/8 in)16 risers15 treads4.2 m (13 ft 9 3/8 in)5.055 m (16 ft 7 in)

    Each row uses the run, the tread thickness and the maximum riser height of this example. These are the example's own sizes, not rules.

    What the National Building Code of Canada 2020 prints for stair steps

    Rise and run of steps in stairs serving a single dwelling unit, as printed in the National Building Code of Canada 2020, Part 9 (a model code; provinces and territories adopt it, some with changes)

    Rise and run of steps in stairs serving a single dwelling unit, as printed in the National Building Code of Canada 2020, Part 9 (a model code; provinces and territories adopt it, some with changes)
    DimensionAt mostAt least
    Rise of a riser (Table 9.8.4.1) 200 mm (7 7/8 in, converted)125 mm (4 15/16 in, converted)
    Run of a tread (Table 9.8.4.2) 355 mm (1 ft 2 in, converted)255 mm (10 1/16 in, converted)

    Source: [1]

    The figures are the model code's for stairs serving a single dwelling unit. Provinces and territories adopt the code with changes, and the calculator does not compare your sizes with these figures: your local building department decides what applies to your stairs.

    Other National Building Code of Canada 2020 stair figures

    Rows: 2

    Tread depth and the clear height over stairs serving a single dwelling unit, as printed in the National Building Code of Canada 2020 (a model code; provinces and territories adopt it, some with changes)

    Tread depth and the clear height over stairs serving a single dwelling unit, as printed in the National Building Code of Canada 2020 (a model code; provinces and territories adopt it, some with changes)
    FigureValue in the code
    A rectangular tread is not deeper than its run plus 25 mm (1 in, converted)
    Clear height over the stairs, at least (single dwelling unit) 1,950 mm (6 ft 4 3/4 in, converted)

    Source: [1]

    Model-code figures, with conditions the code lists. The calculator does not compare your sizes with them: your local building department decides what applies to your stairs.

    Sources (1)

    1. NBC 2020 Table 9.8.4.1, Rise for Rectangular Treads, Tapered Treads and Winders (opens in new tab), National Research Council Canada (NBC 2020), National Building Code of Canada 2020, 2nd printing including 2025 errata. Code or government.
      “Table 9.8.4.1. Rise for Rectangular Treads, Tapered Treads and Winders | Rise, mm | Private Max. 200 Min. 125 | Public Max. 180 Min. 125 (p. 845 of PDF)”
      “Table 9.8.4.2. Run for Rectangular Treads | Run, mm | Private Max. 355 Min. 255 | Public Max. No limit Min. 280 (p. 845 of PDF)”
      “The depth of a rectangular tread shall be not less than its run and not more than its run plus 25 mm. (p. 845 of PDF)”
      “the clear height over stairs serving a single dwelling unit or a house with a secondary suite including their common spaces shall not be less than 1 950 mm. (p. 844 of PDF)”
      Checked 15 November 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.