Self-Leveling Concrete Calculator
HoneyDoMath.com
Enter the area of a floor and the thickness of the pour and get the bags of self-levelling compound to buy, for the bag you choose, at the coverage its maker prints. A floor that is not a rectangle can be drawn with Draw a shape.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Floor: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; farther with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 12 m² (129.17 ft²)
- Perimeter
- 14 m (45 ft 11 3/16 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a floor to level
5 11.3 kg (25 lb) bags
- Compound to pour 60 L
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Self-leveling compound, 11.3 kg (25 lb) bag 5
Questions
How much self-levelling compound do I need?
Area times thickness gives the volume to pour; dividing by the volume one bag makes gives the bags, rounded up once. The table on this page shows the bags for twenty square metres at several thicknesses.
Where does the yield come from?
From the maker's data sheet, cited in the sources: the coverage it prints for one bag at a thickness, times that thickness. Your own bag's label comes first.
Is a thinner pour counted differently?
No. The calculator multiplies the area by the thickness, adds the allowance for waste if you enter one, divides by the bag's yield and rounds up once, at the bag.
Worked example: a floor to level
Show the steps
- Volume one bag covers: the printed coverage times its thickness 2.23 m² (24 ft², converted)[1] × 6 mm (1/4 in) = 13.38 L
- Floor area 4 m (13 ft 1 1/2 in) × 3 m (9 ft 10 1/8 in) = 12 m² (129.17 ft²)
- Volume to pour 12 m² (129.17 ft²) × 5 mm (3/16 in) (0.01 m) = 60 L
- Divide by the volume one bag makes 60 L ÷ 13.38 L = 4.48 bags
- Round up once, to whole bags 4.48 bags = 5 × 11.3 kg (25 lb) bags
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Self-leveling compound allowance for waste | 0% | |
| Default No hidden extra. Check your bag or supplier. | ||
| Coverage of one bag of MAPEI Ultraplan Lite, at the thickness the maker prints | 2.23 m² (24 ft², converted)[1] | |
| MAPEI Canada's data sheet for Ultraplan Lite prints a 25 lb (11.3 kg) bag that covers 2.23 m² at 6 mm down to 0.28 m² at 5 cm, for estimating only. | ||
| Coverage of one bag of MAPEI Ultraplan 1 Plus, at the thickness the maker prints | 0.56 m² (6.03 ft², converted)[2] | |
| MAPEI Canada's data sheet for Ultraplan 1 Plus prints a 50 lbs. (22.7 kg) bag that covers 24 sq. ft. at 1/4" (6 mm), 6 sq. ft. (0.56 m²) at 1" (2.5 cm) and 4 sq. ft. (0.37 m²) at 1.5" (3.8 cm). | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Bags for twenty square metres, by thickness
Litres to pour and bags for twenty square metres at several thicknesses, for the product the calculator starts on
| Thickness | Litres to pour | Bags |
|---|---|---|
| 2 mm (1/16 in) | 40 L | 3 × 11.3 kg (25 lb) bags |
| 3 mm (1/8 in) | 60 L | 5 × 11.3 kg (25 lb) bags |
| 5 mm (3/16 in) | 100 L | 8 × 11.3 kg (25 lb) bags |
| 8 mm (5/16 in) | 160 L | 12 × 11.3 kg (25 lb) bags |
| 10 mm (3/8 in) | 200 L | 15 × 11.3 kg (25 lb) bags |
The yield of the bag is its maker's printed coverage times the thickness it is printed for, shown in the assumptions. Choose another bag in the calculator to count that one. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
What the self-levelling makers print
Rows: 12
Bag size, coverage by thickness and the thickest application printed for each self-levelling product, as its maker states
| Figure | Printed value |
|---|---|
| Bomix Nivaflow, bag size | 22.7 kg (50 lb, converted) (per Bomix's product page, checked 15 Nov 2026) |
| Bomix Nivaflow, thickest single application | 38.1 mm (1 1/2 in, converted) (per Bomix's product page, checked 15 Nov 2026) |
| MAPEI Ultraplan Lite, bag size | 11.3 kg (25 lb, as published) (per MAPEI's data sheet, checked 14 Nov 2026) |
| MAPEI Ultraplan Lite, coverage of one bag at 6 mm | 2.23 m² (24 ft², converted) (per MAPEI's data sheet, checked 14 Nov 2026) |
| MAPEI Ultraplan Lite, coverage of one bag at 12 mm | 1.11 m² (11.95 ft², converted) (per MAPEI's data sheet, checked 14 Nov 2026) |
| MAPEI Ultraplan Lite, coverage of one bag at 19 mm | 0.84 m² (9.04 ft², converted) (per MAPEI's data sheet, checked 14 Nov 2026) |
| MAPEI Ultraplan Lite, coverage of one bag at 2.5 cm | 0.56 m² (6.03 ft², converted) (per MAPEI's data sheet, checked 14 Nov 2026) |
| MAPEI Ultraplan Lite, coverage of one bag at 5 cm | 0.28 m² (3.01 ft², converted) (per MAPEI's data sheet, checked 14 Nov 2026) |
| MAPEI Ultraplan 1 Plus, bag size | 22.7 kg (50 lb, converted) (per MAPEI's data sheet, checked 15 Nov 2026) |
| MAPEI Ultraplan 1 Plus, coverage of one bag at 2.5 cm | 0.56 m² (6.03 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026) |
| MAPEI Ultraplan 1 Plus, coverage of one bag at 3.8 cm | 0.37 m² (3.98 ft², converted) (per MAPEI's data sheet, checked 15 Nov 2026) |
| MAPEI Ultraplan Lite, bag size | 11.3 kg (24.9 lb, converted) (per MAPEI's product page, checked 14 Nov 2026) |
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Each figure is the maker's own, from the sheet cited in the sources. The calculator multiplies the first coverage of the chosen bag by its thickness to get the volume one bag covers. Your own bag's label comes first.
Sources (4)
-
Ultraplan Lite, technical data sheet (MAPEI Canada, 2024-10-09) (opens in new tab), MAPEI Inc., Technical data sheet (en-CA), 9 October 2024.
Manufacturer data.
“25 lbs. (11.3 kg) of Ultraplan Lite provides coverage equal to 50 lbs. (22.7 kg) of a standard self-leveler.”
“Thickness 1/4" (6 mm) 1/2" (12 mm) 3/4" (19 mm)”
“Coverage 24 sq. ft. (2.23 m2) 12 sq. ft. (1.11 m2) 9 sq. ft. (0.84 m2)”
“1" (2.5 cm) 6 sq. ft. (0.56 m2)”
“2" (5 cm) 3 sq. ft. (0.28 m2)”
“Ultraplan Lite mixes easily and flows out to a suitable finish with a final dry density of about 67 lbs. per cu. ft. (1 073 kg per m3) at 28 days.”
Per MAPEI's data sheet, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1) -
Ultraplan 1 Plus, technical data sheet (MAPEI Canada) (opens in new tab), MAPEI Inc., Technical data sheet (en-CA), edition not printed in the text read; ² lost in PDF text layer.
Manufacturer data.
“Packaging Size Plastic bag: 50 lbs. (22.7 kg) Approximate Coverage** per 50 lbs. (22.7 kg) Thickness Coverage 1/4" (6 mm) 24 ... 1" (2.5 cm) 6 sq. ft. (0.56 m ) 1.5" (3.8 cm) 4 sq. ft. (0.37 m ) (p. 6)”
Per MAPEI's data sheet, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2) -
Bomix Nivaflow (Bomix product page) (opens in new tab), Bomix (QUIKRETE Companies, Canada), Product page, undated.
Manufacturer data.
“Size 22.7 kg”
“can be applied in a single application to thicknesses ranging from almost nothing to 38.1 mm (1-1/2 in).”
Per Bomix's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 3) -
Ultraplan Lite (MAPEI Canada product page, en-ca) (opens in new tab), MAPEI Inc., Product page (en-CA), undated.
Manufacturer data.
“25 lbs. (11.3 kg) of Ultraplan Lite provides coverage equal to 50 lbs. (22.7 kg) of a standard self-leveler”
Per MAPEI's product page, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 4)
These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.
Sources
- [1] MAPEI, Ultraplan Lite, technical data sheet (MAPEI Canada, 2024-10-09). Checked 14 November 2026. https://cdnmedia.mapei.com/docs/librariesprovider65/products-documents/1_3000068_ultraplan-lite_en-ca_7f92a56d237144cea4653488170d75ff.pdf
- [2] MAPEI, Ultraplan 1 Plus, technical data sheet (MAPEI Canada). Checked 15 November 2026. https://cdnmedia.mapei.com/docs/librariesprovider65/products-documents/1_3000071_ultraplan-1-plus-_en-ca_1d98923b0c6c43f2b618b43a44c72dd7.pdf
- [3] Bomix, Bomix Nivaflow (Bomix product page). Checked 15 November 2026. https://www.bomix.ca/en/produits/bomix-nivaflow/
- [4] MAPEI, Ultraplan Lite (MAPEI Canada product page, en-ca). Checked 14 November 2026. https://www.mapei.com/ca/en-ca/products-and-solutions/products/detail/ultraplan-lite