Grout Calculator
HoneyDoMath.com
Enter the area, the tile size and thickness, the joint width and the density of your grout, and get the kilograms of grout and the bags to buy, rounded up once. The density and the bag sizes are examples you replace from your own label.
Estimates for planning, not professional advice. Read the full notice.
Example: a tiled floor
1 4.5 kg (10 lb) bag
- Grout for each square metre 0.2 kg (0.48 lb)
- Grout for the area 4.3 kg (9.52 lb)
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Grout, 4.54 kg bag, 4.5 kg (10 lb) bag 1
Questions
How is the grout worked out?
The joints are a slot as deep as the tile and as wide as the joint. The calculator takes the length of joint in each square metre from the tile's two sides, multiplies by the thickness, the joint width and the grout's density, and rounds the bags up once.
Where do I find the density?
Look on the grout's label or data sheet, where the density may be printed in kilograms per cubic metre. The value on this page is an example, not a maker's number, so replace it with the one on your own box.
Worked example: a tiled floor
Show the steps
- Joint length for each square metre: the tile's two sides over its area 900 mm (2 ft 11 7/16 in) (0.9 m) ÷ 0.18 m² (1.94 ft²) = 5 m of joint per m²
- Grout for each square metre: joint length times thickness times joint width times density 5 m of joint per m² × 9 mm (3/8 in) × 3 mm (1/8 in) × 1,600 kg/m³ = 0.216 kg (0.476 lb)
- Grout for the whole area 20 m² (215.28 ft²) ÷ 1 m² (10.76 ft²) × 0.216 kg (0.476 lb) = 4.3 kg (9.52 lb)
- Bags: divide by the bag and round up once 4.3 kg (9.52 lb) ÷ 4.5 kg (10 lb) = 1 × 4.5 kg (10 lb) bag
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Extra grout on top | 0% | |
| Default Our assumption: none. Add a percentage if you want a cushion; check your label or supplier. | ||
| Bag size | 10 lbs.[1] | |
| MAPEI Canada sells Keracolor S sanded grout in a 1 lb tub and 10 lb and 25 lb bags. | ||
| Density of the grout (example) | 1,600 kg/m³ | |
| Default A typed example, not a maker's figure. Replace it with the value on your grout's label or data sheet. | ||
| Tile thickness (example) | 9 mm (3/8 in, converted) | |
| Default A typed example; the joint is filled to the full depth of the tile. Replace it with the thickness of your own tiles. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Grout packs by maker
Rows: 1
The bag or pack each maker prints for its grout
| Pack | Printed value |
|---|---|
| Ultracolor Plus FA, pack | 4.5 kg (10 lb, as published) |
Figures in the Printed value column are per MAPEI's data sheet, checked 15 Nov 2026.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Source: [2]
Each pack is the size the maker's page prints.
Sources (2)
-
Keracolor S, technical data sheet (MAPEI Canada) (opens in new tab), MAPEI Inc., Technical data sheet (en-CA), edition not printed in the text read.
Manufacturer data.
“Bag: 10 lbs. (4.54 kg)”
“Tub: 1 lb. (0.45 kg), Canada only”
“Bag: 25 lbs. (11.3 kg)”
Per MAPEI's data sheet, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1) -
Ultracolor Plus FA, technical data sheet (MAPEI Canada) (opens in new tab), MAPEI Inc., Technical data sheet (en-CA), edition not printed in the text read.
Manufacturer data.
“Packaging Size Bag: 10 lbs. (4.54 kg) Bag: 25 lbs. (11.3 kg) (p. 7)”
Per MAPEI's data sheet, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.
Sources
- [1] MAPEI, Keracolor S, technical data sheet (MAPEI Canada). Checked 14 November 2026. https://cdnmedia.mapei.com/docs/librariesprovider65/products-documents/1_3000009_keracolor-s_en-ca_bc72638ec10240b29031a0ebe4d98cad.pdf
- [2] MAPEI, Ultracolor Plus FA, technical data sheet (MAPEI Canada). Checked 15 November 2026. https://cdnmedia.mapei.com/docs/librariesprovider65/products-documents/1_3000144_ultracolor-plus-fa_en-ca_91dfe5ed951e4e9ebd6a79ecb51414be.pdf