Drywall Calculator

Enter a room's length, width and wall height to get the drywall sheets for walls, ceiling or both, then the joint compound, tape and screws for the same board, rounded up once at each thing you buy. The sheets are the larger of the area count and the cut-layout count, and both are shown.

Estimates for planning, not professional advice. Read the full notice.

Room and finishing

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.2 metres, 13 feet 9 and 3 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.6 metres, 11 feet 9 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.5 metres, 8 feet 2 and 7 sixteenths inches

Like 11 m²

reads as 4.5 square metres, 48.44 square feet

Like 40 L

reads as 40.5 litres, 10.7 gallons

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 120 metres, 393 feet 8 and 7 sixteenths inches

Like 11 m²

reads as 0.08 square metres, 0.86 square feet

Example: a bedroom, walls and ceiling

31 sheets of drywall

  • Walls and ceiling together 54.12 m² (582.54 ft²)
  • Sheets by area, with the waste, before rounding 20.03 sheets of drywall
  • Sheets by area, rounded up 21 sheets of drywall
  • Sheets by layout, cutting each wall and the ceiling 31 sheets of drywall
  • Sheets by area with the openings taken off 19 sheets of drywall

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Drywall sheets, Drywall sheet, 2438 × 1219 mm 31
  • Joint compound pails, 10 L pail 3
  • Joint tape rolls, 50 m (164 ft 1/2 in) roll 2
  • Drywall screws, screws 677

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many sheets do I need for the walls and the ceiling?

    Enter the room's length, width and wall height and choose Walls and ceiling. The calculator adds the four walls and the ceiling, adds your waste allowance once, divides by the area of one sheet and rounds up once, then counts the cut layout and orders the larger of the two counts. Choose Walls or Ceiling to count one surface alone.

    Does a longer sheet change the count?

    Yes, a longer sheet covers more area, so the count usually falls. Change the sheet size above and the sheets, and the finishing that follows the drywall area, update together. The sizes in the list are typed examples, so choose the one your supplier sells.

    Do the doors and windows come off the count?

    The calculator starts with the walls counted gross, with openings not taken off, and shows the count with the openings taken off beside it. Enter the area of your openings and switch Openings to Taken off to count them out.

    Where do the compound, tape and screw amounts come from?

    From three rates in the fields above, each started at an example, not a maker's figure. Replace them with the rates on your own labels and the pails, rolls and screws follow the drywall area.

    Worked example: a bedroom, walls and ceiling

    Show the steps
    1. Walls: the perimeter times the wall height 15.6 m (51 ft 2 3/16 in) × 2.5 m (8 ft 2 7/16 in) = 39 m² (419.79 ft²)
    2. Ceiling: length times width 4.2 m (13 ft 9 3/8 in) × 3.6 m (11 ft 9 3/4 in) = 15.12 m² (162.75 ft²)
    3. Add the waste allowance, once 54.12 m² (582.54 ft²) + 10% = 59.53 m² (640.8 ft²)
    4. Divide by the area of one sheet 59.53 m² (640.8 ft²) ÷ 2.97 m² (31.99 ft²) = 20.03 sheets of drywall
    5. Round up once, to whole sheets 20.03 sheets of drywall = 21 sheets of drywall
    6. Count the layout too and order the larger of the two, so a cut layout is never short 31 sheets of drywall = 31 sheets of drywall

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 10%
    Default An example allowance for cuts and breakage, added once. Change it for your own job.
    Sheet size No default
    Default The starting size is the one the maker prints, cited on this page. Choose the size your supplier sells from the list above the result.
    Sheet size, length 2,438 mm (8 ft, converted)[1]
    CGC's data sheet for Sheetrock Firecode C panels prints thicknesses of 12.7 and 15.9 mm, a width of 1219 mm and lengths of 2438 to 3658 mm.
    Sheet size, width 1,219 mm (4 ft, converted)[1]
    CGC's data sheet for Sheetrock Firecode C panels prints thicknesses of 12.7 and 15.9 mm, a width of 1219 mm and lengths of 2438 to 3658 mm.
    Joint compound per hundred square metres of drywall 40.5 L per 100 m²[2]
    CGC's submittal sheet for All Purpose Lite drywall compound gives a joint-finishing coverage of approximately 40.5 L per 100 m² of gypsum panels, in a 17 L carton.
    Joint tape per hundred square metres of drywall 120 m per 100 m²[3]
    CGC's data sheet for its paper drywall joint tape gives approximately 120 m of tape per 100 m² of gypsum panels.
    Drywall area per screw 0.08 m² (0.86 ft², converted)
    Default An example rate, not a maker's figure. It is a field above the result: replace it with the rate on your own label.
    Pail size No default
    Default Choose it from the list above the result. Check your label or supplier.
    Tape roll (examples; use your own) length No default
    Default Choose it from the list above the result. Check your label or supplier.

    What CGC prints for three panels and a compound

    Rows: 10

    Figures CGC prints for its Sheetrock UltraLight, Firecode C and Mold Tough AR Firecode Core panels and its All Purpose Lite joint compound, as printed

    Figures CGC prints for its Sheetrock UltraLight, Firecode C and Mold Tough AR Firecode Core panels and its All Purpose Lite joint compound, as printed
    FigurePrinted value
    UltraLight panel thickness 12.7 mm (1/2 in, converted) (per CGC's data sheet, checked 13 Nov 2026)
    UltraLight panel, widest width 1,372 mm (4 ft 6 in, converted) (per CGC's data sheet, checked 13 Nov 2026)
    Firecode C panel, thinner panel 12.7 mm (1/2 in, converted) (per CGC's data sheet, checked 13 Nov 2026)
    Firecode C panel, thicker panel 15.9 mm (5/8 in, converted) (per CGC's data sheet, checked 13 Nov 2026)
    Mold Tough AR Firecode Core panel, thickness 15.9 mm (5/8 in, converted) (per CGC's data sheet, checked 13 Nov 2026; per CGC's data sheet, checked 14 Nov 2026)
    Mold Tough AR Firecode Core panel, width 1,219 mm (4 ft, converted) (per CGC's data sheet, checked 13 Nov 2026; per CGC's data sheet, checked 14 Nov 2026)
    Mold Tough AR Firecode Core panel, shortest length 2,438 mm (8 ft, converted) (per CGC's data sheet, checked 13 Nov 2026; per CGC's data sheet, checked 14 Nov 2026)
    Mold Tough AR Firecode Core panel, longest length 3,658 mm (12 ft, converted) (per CGC's data sheet, checked 13 Nov 2026; per CGC's data sheet, checked 14 Nov 2026)
    All Purpose Lite, joint finishing per 100 m² of panels 40.5 L (per CGC's published data, checked 13 Nov 2026)
    All Purpose Lite carton 17 L (per CGC's published data, checked 13 Nov 2026)

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Sources: [4][1][5][2]

    The sheet size starts at the CGC length and width cited above. The pail size and the rates in the fields above stay your own typed examples. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by CGC.

    Sources (5)

    1. Sheetrock Brand Firecode C gypsum panels, data sheet EWB2965 (CGC, Canada) (opens in new tab), CGC Inc. (USG), Data sheet EWB2965. Manufacturer data.
      “Available in 12.7 mm (1/2 in.) and 15.9 mm (5/8 in.) thicknesses”
      “Lengths 2438-3658 mm (8-12 ft.)”
      “Width 1219 mm (4 ft.)”
      Per CGC's data sheet, checked 13 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. Sheetrock Brand All Purpose Lite drywall compound, submittal sheet (CGC, Canada) (opens in new tab), CGC Inc. (USG), Submittal sheet, edition not printed in the text read. Manufacturer data.
      “Coverage: Joint Finishing, approximately 40.5 L/100 m2 (10 gal./1,000 ft.2) of gypsum panels.”
      “Packaging: 17 L (4.5 gal.) carton”
      Per CGC's published data, checked 13 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
    3. Drywall Joint Tape, data sheet (CGC, Canada) (opens in new tab), CGC Inc. (USG), Data sheet, edition not printed in the text read. Manufacturer data.
      “Approx. 120 m/100 m2 (370 ft./1000 ft.2) gypsum panels.”
      “22.9 m (75 ft) Roll 76.2 m (250 ft) Roll 152.4 m (500 ft) Roll”
      “Nom. 52 mm (2-1/16”)”
      “Contain 24 ea. 22.9 m (75') rolls per carton, 20 ea. 76.2 m (250') rolls, or 10 each 152.4 m (500') rolls”
      Per CGC's data sheet, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 3)
    4. Sheetrock Brand UltraLight Panels, data sheet (CGC, Canada) (opens in new tab), CGC Inc. (USG), Data sheet, edition not printed in the text read. Manufacturer data.
      “Thickness 12.7 mm (1/2 in.)”
      “Width 1219 mm (4 ft.), 1372 mm (54 in.)”
      “Lengths 2438-4267 mm (8-14 ft.)”
      Per CGC's data sheet, checked 13 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 4)
    5. Sheetrock Brand Mold Tough AR Firecode Core gypsum panels, data sheet (CGC, Canada) (opens in new tab), CGC Inc. (USG), Data sheet, edition not printed in the text read. Manufacturer data.
      “Other sizes available by special order. Check with your local CGC representative for availability.”
      “Thickness 15.9 mm (5/8 in.) Lengths 2438-3658 mm (8-12 ft.) Width 1219 mm (4 ft.)”
      Per CGC's data sheet, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 5)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.