Lumber Volume Calculator

Enter the thickness, width and length of the lumber and how many pieces, and get the volume of one piece and of the whole list in cubic metres, with the pieces to order and a waste allowance on the total. The lengths are ones you type.

Estimates for planning, not professional advice. Read the full notice.

One section of lumber (the pieces are counted with the plus and minus below)

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 50 millimetres, 1 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 100 millimetres, 3 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.8 metres, 15 feet 9 inches

Example: a list of lumber

0.48 m³ (0.63 yd³) to order (0.48 m³ exact)

  • Volume of one piece, in cubic metres 0.024 m³ (0.8476 ft³)
  • Volume of all the pieces, in cubic metres 0.48 m³ (16.951 ft³)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Pieces of lumber, Lumber 50 × 100 mm, 4.8 m 20
  • Lumber volume, rounded up once, 1 m³ (1.31 yd³) 0.48 m³ (0.63 yd³)

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How do I work out the volume of lumber in cubic metres?

    Multiply the thickness, the width and the length, all in metres, for one piece, then multiply by the number of pieces. The calculator takes the sizes in millimetres and metres and shows each step.

    Why is the volume rounded up?

    Lumber is ordered by the piece or by the cubic metre. The calculator keeps the exact volume through the math and rounds up once at the end, to a thousandth of a cubic metre, so the figure never falls short.

    Are the sizes the sawn or the planed sizes?

    The calculator uses the sizes you type, as given. If your lumber is sold by a nominal size and planed smaller, enter the size you will receive.

    Worked example: a list of lumber

    Show the steps
    1. One piece: thickness times width times length 50 mm (1 15/16 in) × 100 mm (3 15/16 in) × 4.8 m (15 ft 9 in) = 0.024 m³ (0.8476 ft³)
    2. All the pieces: the volume of one piece times the number of pieces 0.024 m³ (0.8476 ft³) × 20 pieces = 0.48 m³ (16.951 ft³)
    3. Round up once, to the ordering step of a thousandth of a cubic metre 0.48 m³ (16.951 ft³) = 0.48 m³ (0.63 yd³)

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 0%
    Default Your own allowance, added once to the total. Check your label or supplier.

    Lumber volume by length

    Volume of one piece and of the whole list in cubic metres, for the section in the example, by length

    Volume of one piece and of the whole list in cubic metres, for the section in the example, by length
    LengthOne pieceAll the pieces
    2.4 m 0.012 m³ (0.4238 ft³)0.24 m³ (8.476 ft³)
    3 m 0.015 m³ (0.5297 ft³)0.3 m³ (10.594 ft³)
    3.6 m 0.018 m³ (0.6357 ft³)0.36 m³ (12.713 ft³)
    4.2 m 0.021 m³ (0.7416 ft³)0.42 m³ (14.832 ft³)
    4.8 m 0.024 m³ (0.8476 ft³)0.48 m³ (16.951 ft³)
    6 m 0.03 m³ (1.0594 ft³)0.6 m³ (21.189 ft³)

    The lengths are examples; type the length you are buying. Each row is worked out on its own, with no waste added.

    Common stock lengths of dimension lumber

    Rows: 2

    Longest common lengths of dimension lumber in Western and Eastern Canada, as the Canadian Wood Council prints them

    Longest common lengths of dimension lumber in Western and Eastern Canada, as the Canadian Wood Council prints them
    RegionLength
    Western Canada 6.1 m (20 ft 3/16 in, converted)
    Eastern Canada 4.9 m (16 ft 15/16 in, converted)

    Source: [1]

    The Canadian Wood Council says lumber up to these lengths is common in each region.

    Structural lumber as Canfor lists it

    Rows: 2

    Nominal sizes and lengths of the Canfor structural lumber, as the maker prints them

    Nominal sizes and lengths of the Canfor structural lumber, as the maker prints them
    ProductNominal sizes, inchesLengths, feet
    Canfor Rocky Mountain Douglas-fir & Western Larch structural lumber 2x4 – 108 – 20
    Canfor Spruce-Pine-Fir structural lumber (North American dimensions) 2x3, 2x4 – 126 – 20

    Figures in the Nominal sizes, inches and Lengths, feet columns are per Canfor's product page, checked 15 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Sources: [2][3]

    Canfor prints nominal sizes in inches, thickness by width, and lengths in feet.

    Sources (3)

    1. Sizes of dimension lumber (opens in new tab), Canadian Wood Council, Sizes of dimension lumber, undated. Standards or industry body.
      “Lengths up to 6.1 m (20 ft) are common in Western Canada and lengths up to 4.9 m (16 ft) in Eastern Canada.”
      Checked 14 November 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. Rocky Mountain Douglas-fir & Western Larch structural lumber (Canfor product page) (opens in new tab), Canfor, Product page, undated. Manufacturer data.
      “Nominal Dimensions TxW, inches 2x4 – 10 Lengths Feet 8 – 20”
      Per Canfor's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
    3. Spruce-Pine-Fir structural lumber (Canfor product page) (opens in new tab), Canfor, Product page, undated. Manufacturer data.
      “Nominal Dimensions TxW, inches 2x3, 2x4 – 12 Lengths Feet 6 – 20”
      Per Canfor's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 3)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.