Decking Calculator
HoneyDoMath.com
Enter the length and width of the deck, the board width and the gap you will leave, and get the boards to order from the stock length and the screws, with waste on the total; the math shows the rows across the deck, the boards in each row and the joists crossed.
Estimates for planning, not professional advice. Read the full notice.
Example: a deck
28 decking boards
- Rows of boards across the deck 25
- Boards before waste 25
- Joists the boards cross 13
- Screws, at the number you chose for each board and joist 650
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Decking boards, Decking board 28 mm, 4.8 m 28
- Decking screws, Decking screw 650
Questions
How many decking boards do I need?
The calculator works out the rows across the deck from the board width and the gap, the boards in each row from the stock length, and adds your waste allowance, rounded up once. Change any size and the count changes.
How big a gap goes between decking boards?
The gap is the number you type; the calculator does not choose it. Use the figure in your board maker's installation guide: the rows and the boards change with it.
How many screws are there for each board?
The tool counts the screws at every place a board crosses a joist, at the number you pick for each crossing. Check the screw count against your product's guide.
Worked example: a deck
Show the steps
- Rows: the deck width plus one gap, over a board plus a gap, rounded up 3.6 m (11 ft 9 3/4 in) + 5 mm (3/16 in) ÷ 145 mm (5 11/16 in) = 25 rows
- Boards in each row: the run over the stock length, rounded up 4.8 m (15 ft 9 in) ÷ 4.8 m (15 ft 9 in) = 1 board in each row
- Boards before waste: rows times boards in each row 25 rows × 1 board in each row = 25 decking boards
- Add the waste allowance and round up once 25 decking boards + 10% = 28 decking boards
- Screws: rows times joists crossed times screws at each crossing 25 rows × 13 joists × 2 screws = 650 screws
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 10% | |
| Default Your own allowance, added once to the total. Check your label or supplier. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
This deck by stock length
Boards per row, boards before waste, the stock left over and boards with offcuts shared, for the deck above at each stock length
| Length bought | Boards in each row | Boards before waste | Offcut left over | Boards if offcuts are shared |
|---|---|---|---|---|
| 2.4 m | 2 | 50 | 0 mm (0 in) | 50 |
| 3.6 m | 2 | 50 | 60 m (196 ft 10 3/16 in) | 34 |
| 4.8 m | 1 | 25 | 0 mm (0 in) | 25 |
Every figure is the deck in the example, with each stock length in turn. The left-over column is the stock bought less the rows laid.
Decking as Canfor lists it
Rows: 1
Nominal size and lengths of the Canfor decking, as the maker prints them
| Product | Nominal size, inches | Lengths, feet |
|---|---|---|
| Canfor Spruce Pine Fir decking | 5/4x6 | 8 – 16 |
Figures in the Nominal size, inches and Lengths, feet columns are per Canfor's product page, checked 15 Nov 2026.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Source: [1]
Canfor prints the nominal size in inches, thickness by width, and the lengths in feet.
Screws per box
Rows: 3
Screws in one box of the GRK composite trim screw, by screw size, as the maker prints them
| Screw size | Screws per box |
|---|---|
| GRK RT Composite Exterior Trim Screw (T-10), #8 × 2 in | 725 |
| GRK RT Composite Exterior Trim Screw (T-10), #8 × 2-1/2 in | 605 |
| GRK RT Composite Exterior Trim Screw (T-10), #8 × 3-1/8 in | 514 |
Figures in the Screws per box column are per GRK's product page, checked 15 Nov 2026.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Source: [2]
Each count is the one the maker prints for that screw size.
Sources (2)
-
Decking (Canfor product page) (opens in new tab), Canfor, Product page, undated.
Manufacturer data.
“Nominal Dimensions TxW, inches 5/4x6 Lengths Feet 8 – 16”
Per Canfor's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1) -
RT Composite Exterior Trim Screw (GRK Fasteners product page, global site) (opens in new tab), GRK Fasteners, Product page, undated; the global GRK site (no separate Canadian page).
Manufacturer data.
“Size (Dia. x Lgth.) | Part No. | Screw Qty. #8 x 2-1/2" | 16079 | 605”
“#8 x 2" | 16077 | 725”
“#8 x 3-1/8" | 16083 | 514”
Per GRK's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.
Sources
- [1] Canfor, Decking (Canfor product page). Checked 15 November 2026. https://www.canfor.com/products/outdoor-living/decking
- [2] GRK, RT Composite Exterior Trim Screw (GRK Fasteners product page, global site). Checked 15 November 2026. https://www.grkfasteners.com/grk-products/finish/rt-composite-exterior-trim-screw