Fascia and Soffit Calculator
HoneyDoMath.com
Enter the eaves length, the depth of the overhang and the size of your soffit boards and fascia boards and get the boards to buy, each rounded up once. The math is shown for an example.
Estimates for planning, not professional advice. Read the full notice.
Example: a soffit along one eave
8 soffit boards
- Soffit area 6 m² (64.58 ft²)
- Fascia boards 4 fascia boards
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Soffit boards, Soffit boards, 0.3 m cover, 3 m long 8
- Fascia boards, Fascia boards, 3 m 4
Questions
How many soffit boards do I need?
Enter the cover width and the board length from your own label and the calculator counts boards; the soffit area it shows is the eaves length times the depth.
Does the calculator count vented boards?
It counts soffit boards and fascia boards. Edge channels are not counted.
Worked example: a soffit along one eave
Show the steps
- Rows of boards across the depth: the depth over the cover width, rounded up 600 mm (1 ft 11 5/8 in) ÷ 300 mm (11 13/16 in) = 2 rows
- Boards in one row: the eaves length over the board length, rounded up 10 m (32 ft 9 11/16 in) ÷ 3 m (9 ft 10 1/8 in) = 4 boards
- Boards: the boards in one row times the rows 4 boards × 2 rows = 8 soffit boards
- Fascia: the eaves length over the board length, rounded up once 10 m (32 ft 9 11/16 in) ÷ 3 m (9 ft 10 1/8 in) = 4 fascia boards
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Vinyl soffit by maker
Rows: 2
The vent area a maker prints for each soffit panel per lineal foot, with the vent area along the example eave
| Product | Vent area as printed, square inches per lineal foot | Vent area along the example eave |
|---|---|---|
| Gentek Oxford vinyl soffit | 5.3 | 1,122 cm² (1 ft²) |
| Beaded Premium vinyl soffit | 2.4 | 508 cm² (1 ft²) |
Figures in the Vent area as printed, square inches per lineal foot column are per Gentek's product page, checked 15 Nov 2026.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Source: [1]
The first figure is the maker's printed figure. The second is worked out on its own for each panel: the printed figure times the length of the example eave, shown in square centimetres.
Sources (1)
-
Vinyl soffit (Gentek Canada product page) (opens in new tab), Gentek Canada, Product page, undated.
Manufacturer data.
“The fully vented panel has 5.3 sq. inches of ventilation per lineal foot.”
“Beaded Premium ... generous 8″ width ... The vented panel has 2.4 sq. inches of ventilation per lineal foot.”
Per Gentek's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.
Sources
- [1] Gentek, Vinyl soffit (Gentek Canada product page). Checked 15 November 2026. https://www.gentek.ca/vinyl-soffit/