Exterior Paint Calculator
HoneyDoMath.com
Enter the size of the house, its gable ends and openings, the length and width of the trim, the coats and the area one litre covers, and get the cans of exterior paint and primer, rounded up once, with the math shown for an example.
Estimates for planning, not professional advice. Read the full notice.
Example: a house with its trim painted
3 cans of exterior paint
- Area to paint, walls and trim 94.87 m² (1,021.17 ft²)
- Paint before rounding, in litres 23.72 L
- Primer cans 1 can of primer
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Exterior paint, Exterior paint, 10 litre can 3
- Primer, Primer, 10 litre can 1
Questions
How much exterior paint does a house exterior take?
Add the net wall area, any gables and the trim, multiply by the coats, divide by the area one litre covers and round up once to whole cans. The example shows each step.
Why does a rough surface need more paint?
Rough textures take more paint. The texture factor multiplies the area; it starts at smooth and you can pick a medium or rough factor.
Worked example: a house with its trim painted
Show the steps
- Gross wall: the distance around the house times the wall height 40 m (131 ft 2 13/16 in) × 2.5 m (8 ft 2 7/16 in) = 100 m² (1,076.39 ft²)
- Openings: every door and window at its own size 7.65 m² (82.34 ft²) = 7.65 m² (82.34 ft²)
- Net wall: gross wall less the openings 100 m² (1,076.39 ft²) − 7.65 m² (82.34 ft²) = 92.35 m² (994.05 ft²)
- Trim: its length times the width of its painted face 25.2 m (82 ft 8 1/8 in) × 100 mm (3 15/16 in) = 2.52 m² (27.13 ft²)
- Area to paint: net wall plus trim 92.35 m² (994.05 ft²) + 2.52 m² (27.13 ft²) = 94.87 m² (1,021.17 ft²)
- Litres: area times coats, divided by the area one litre covers 94.87 m² (1,021.17 ft²) × 2 coats ÷ 8 m² (86 ft²) = 23.72 L
- Round up once, to whole cans 23.72 L = 3 cans of exterior paint
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Exterior paint by maker
Rows: 1
The coverage of one gallon, as each maker prints it
| Product | Coverage of one gallon, low end | Coverage of one gallon, high end |
|---|---|---|
| Benjamin Moore Element Guard Exterior Paint, Flat (3.78 L) | 27.9 m² (300.31 ft², converted) | 37.2 m² (400.42 ft², converted) |
Figures in the Coverage of one gallon, low end and Coverage of one gallon, high end columns are per Benjamin Moore's product page, checked 14 Nov 2026.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Source: [1]
The two coverages are the maker's printed range for one gallon.
Sources (1)
-
Element Guard Exterior Paint, Flat, 3.78 L (Benjamin Moore Canada product page) (opens in new tab), Benjamin Moore & Co., Product page, undated.
Manufacturer data.
“Coverage (Sq. Ft./Gal) 27.9-37.2 m2 (300-400 pi2)”
Per Benjamin Moore's product page, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.
Sources
- [1] Benjamin Moore, Element Guard Exterior Paint, Flat, 3.78 L (Benjamin Moore Canada product page). Checked 14 November 2026. https://www.benjaminmoore.com/en-ca/product/element-guard-exterior-paint-flat-3-78-l/K763