Laminate Flooring Calculator

Enter the room, the coverage on your laminate box and a waste allowance to get the boxes to buy, rounded up once. The plank size and expansion gap are fields for your own layout and do not change the count.

A ready-made setup of the Flooring Calculator.

Estimates for planning, not professional advice. Read the full notice.

Room and box

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 5 metres, 16 feet 4 and 7 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.5 metres, 11 feet 5 and 13 sixteenths inches

Like 11 m²

reads as 2 square metres, 21.53 square feet

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Example: a laminate living room floor

10 boxes of laminate flooring

  • Floor area 17.5 m² (188.37 ft²)
  • Area with the waste allowance, before rounding 19.25 m² (207.21 ft²)
  • Flooring bought 20 m² (215.28 ft²)
  • Bought beyond the floor's own area 2.5 m² (26.91 ft²)
  • Flooring, by the box, boxes of flooring 10

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many boxes of laminate do I need?

    Enter the room's length and width and the coverage printed on your box. The calculator adds your waste allowance once to the floor area, divides by the box coverage and rounds up once to whole boxes.

    Does the gap around the edge change the box count?

    No. The gap is a field for your own layout, shown beside the result and not taken off the area, so the box count follows the room's full area.

    Worked example: a laminate living room floor

    Show the steps
    1. Area: length times width 5 m (16 ft 4 7/8 in) × 3.5 m (11 ft 5 13/16 in) = 17.5 m² (188.37 ft²)
    2. Add the waste allowance, once 17.5 m² (188.37 ft²) × 1.1 = 19.25 m² (207.21 ft²)
    3. Divide by the coverage of one box 19.25 m² (207.21 ft²) ÷ 2 m² (21.53 ft²) = 9.63 boxes
    4. Round up once, to whole boxes 9.63 boxes = 10 boxes of laminate flooring

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 10%
    Default A typical allowance for a straight layout, added once. It is your own figure: change it for your layout.
    Coverage of one box No default
    Default From the box label. Check your label or supplier.
    Plank size No default
    Default It does not change the count, which follows the box coverage. Check your label or supplier.
    Expansion gap No default
    Default Shown for your own layout; it does not change the box count. Check your label or supplier.

    Boxes for common room sizes

    Boxes for common room sizes at an example box coverage, with the waste allowance added once

    Boxes for common room sizes at an example box coverage, with the waste allowance added once
    RoomFloor areaBoxes at 2.2 m² a box (example)
    3 × 3 m 9 m² (96.88 ft²)5
    3 × 4 m 12 m² (129.17 ft²)6
    4 × 4 m 16 m² (172.22 ft²)8
    4 × 5 m 20 m² (215.28 ft²)10
    5 × 6 m 30 m² (322.92 ft²)15
    6 × 8 m 48 m² (516.67 ft²)24

    The box coverage is an example, not a product's. Your own label gives the real coverage, so enter it in the field above for your count.