Sod Calculator

Enter the length and width of your lawn and choose a roll size from your supplier, and get the sod rolls to order, rounded up once from the area with the waste allowance added once.

Estimates for planning, not professional advice. Read the full notice.

Lawn size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 6 metres, 19 feet 8 and 1 quarter inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 5 metres, 16 feet 4 and 7 eighths inches

Example: a rectangular lawn

32 sod rolls

  • Area to order, with the waste allowance 31.5 m² (339.06 ft²)
  • Area of one roll 1 m² (10.76 ft²)
  • Sod, by the roll, sod rolls 32

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many rolls of sod do I need?

    Enter the lawn's length and width and pick the roll size from your supplier. The calculator adds the waste allowance to the area once, divides by the area of one roll and rounds up to whole rolls.

    How big is a roll of sod?

    Roll sizes differ between suppliers, so the size is a choice here, not a fixed figure. Ask your supplier for the size and pick the nearest one.

    Is a waste allowance added?

    Yes, once, to the area before the rolls are counted. It starts at a value you can change in the assumptions, and your supplier can say what they allow.

    Worked example: a rectangular lawn

    Show the steps
    1. Area of the lawn 6 m (19 ft 8 1/4 in) × 5 m (16 ft 4 7/8 in) = 30 m² (322.92 ft²)
    2. Area to order: the lawn plus the waste allowance, added once 30 m² (322.92 ft²) × 1.05 = 31.5 m² (339.06 ft²)
    3. Area of one roll from its two sides 2 m (6 ft 6 3/4 in) × 500 mm (1 ft 7 11/16 in) = 1 m² (10.76 ft²)
    4. Rolls: the area to order over one roll, rounded up once 31.5 m² (339.06 ft²) ÷ 1 m² (10.76 ft²) = 32 sod rolls

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance (%) 5%
    Default Ask your sod supplier. Cuts and edges use some of every order.

    Rolls by lawn size

    Rolls of the starting size for four lawn sizes, with the starting waste allowance

    Rolls of the starting size for four lawn sizes, with the starting waste allowance
    LawnArea to orderRolls
    10 m² 10.5 m² (113 ft²)11 sod rolls
    25 m² 26.3 m² (282.6 ft²)27 sod rolls
    50 m² 52.5 m² (565.1 ft²)53 sod rolls
    100 m² 105 m² (1,130.2 ft²)105 sod rolls

    Each row is worked out on its own from the area to order. The roll size is a starting example; yours comes from your supplier.