Mortar Calculator

Enter a wall's length and height, choose block or brick, type its size and the wall area one bag lays, and get the bags of mortar, rounded up once, with the working shown for an example wall.

Estimates for planning, not professional advice. Read the full notice.

Wall size and unit

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 5 metres, 16 feet 4 and 7 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2 metres, 6 feet 6 and 3 quarters inches

Like 11 m²

The size on the maker's sheet or the label. The figure shown is an example, not a maker's size: type the one for your unit. A joint typed here is added to the length and the height of the unit.

reads as 400 millimetres, 1 foot 3 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 200 millimetres, 7 and 7 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

From the bag or the maker's sheet. The figure shown is an example: type the one for your bag.

reads as 2 square metres, 21.53 square feet

Example: a concrete block wall

5 30 kg (66.1 lb) bags

  • Wall area 10 m² (107.64 ft²)
  • Units in the wall, exact 125 blocks

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Mortar bags, 30 kg (66.1 lb) bag 5

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many bags of mortar do I need?

    The calculator counts the blocks or bricks in the wall from their size, then divides by the number one bag lays, worked out from the wall area you type for one bag. It rounds up once, on the units in the wall without waste.

    Where does the area one bag lays come from?

    From the bag or the maker's data sheet for your mortar. The figure on the page is an example to replace; no mortar sheet is built into this page.

    Worked example: a concrete block wall

    Show the steps
    1. Wall area: length times height 5 m (16 ft 4 7/8 in) × 2 m (6 ft 6 3/4 in) = 10 m² (107.64 ft²)
    2. Units: the wall area divided by the face of one unit 10 m² (107.64 ft²) ÷ 0.08 m² (0.86 ft²) = 125 blocks
    3. Mortar bags: units divided by the units one bag lays, rounded up once 125 blocks ÷ 25 blocks = 5 × 30 kg (66.1 lb) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    SAKRETE Mortar Mix Type S 30 kg (66.1 lb, converted)[1]
    One 30 kg bag of SAKRETE Mortar Mix Type S (Sika Canada) contains approximately 0.018 m³ of fresh mortar.
    Bomix Mortar Mix (grey) 30 kg (66.1 lb, converted)[2]
    Bomix's page for its grey Mortar Mix prints a 30 kg bag size (no yield is printed).
    SAKRETE Mortar Mix Type N 30 kg (66.1 lb, converted)[3]
    With a 10 mm joint, one 30 kg bag of SAKRETE Mortar Mix Type N yields approximately 33 bricks, 6.5 bricks per 0.10 m².

    Mortar bags for walls of several heights

    Bags of mortar for a wall of the example length at five heights

    Bags of mortar for a wall of the example length at five heights
    Wall heightMortar bags
    1 m 3 × 30 kg (66.1 lb) bags
    1.5 m 4 × 30 kg (66.1 lb) bags
    2 m 5 × 30 kg (66.1 lb) bags
    2.4 m 6 × 30 kg (66.1 lb) bags
    3 m 8 × 30 kg (66.1 lb) bags

    Each row uses the starting unit size and the bag area above. They are examples: type your own in the calculator. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers.

    Bricks as the maker prints them

    Rows: 2

    Length, height, thickness, bricks per cube and area per cube printed by the maker for each brick

    Length, height, thickness, bricks per cube and area per cube printed by the maker for each brick
    ProductLengthHeightThicknessBricks per cubeArea per cube
    Cardin Brick 257 mm (10 1/8 in, converted)79 mm (3 1/8 in, converted)90 mm (3 9/16 in, converted)3528.36 m² (90.01 ft², as published)
    Melville Norman Brick 290 mm (11 7/16 in, converted)57 mm (2 1/4 in, converted)90 mm (3 9/16 in, converted)4328.69 m² (93.49 ft², as published)

    Figures in the Length, Height, Thickness, Bricks per cube and Area per cube columns are per Permacon's published data, checked 14 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [4]

    Each figure is the one the maker's guide prints for that brick. The calculator reads the brick size from its own fields.

    Blocks as the maker prints them

    Rows: 1

    The two sizes the maker's guide prints for its block, in millimetres

    The two sizes the maker's guide prints for its block, in millimetres
    ProductSize A, as printedSize B, as printed
    Colosseo Block A / B 90 × 190 × 39090 × 190 × 590

    Figures in the Size A, as printed and Size B, as printed columns are per Permacon's published data, checked 14 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [4]

    The sizes are in the order the maker's guide prints them. The calculator reads the block size from its own fields.

    Masonry cement as the maker prints it

    Rows: 1

    Bag sizes of Type N and Type S masonry cement and the blocks or bricks one bag lays, as the maker's data sheet prints them

    Bag sizes of Type N and Type S masonry cement and the blocks or bricks one bag lays, as the maker's data sheet prints them
    ProductType N bagType S bagBlocks per bag, fromBlocks per bag, toBricks per bag
    SAKRETE Type N / Type S Masonry Cement 30 kg (66.1 lb, converted)33.3 kg (73.4 lb, converted)3540135

    Figures in the Type N bag, Type S bag, Blocks per bag, from, Blocks per bag, to and Bricks per bag columns are per SAKRETE's data sheet, checked 15 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [5]

    The sheet gives the blocks and bricks one bag lays at the proportions it suggests.

    Sources (5)

    1. SAKRETE Mortar Mix Type S, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “30 KG (66 lb) contains approximately 0.018 m3 (0.65 ft3) of fresh mortar.”
      Per SAKRETE's data sheet, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. Bomix Mortar Mix, grey (Bomix product page) (opens in new tab), Bomix (QUIKRETE Companies, Canada), Product page, undated. Manufacturer data.
      “30 kg”
      Per Bomix's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
    3. SAKRETE Mortar Mix Type N, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “With a 10 mm (3/8") joint, 30 KG (66 lb) yields approximately: 33 bricks: 6.5 bricks per 0.10 m² (1 ft2) (p. 1)”
      Per SAKRETE's data sheet, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 3)
    4. Masonry product guide 2024 (English) (opens in new tab), Permacon, Masonry product guide 2024, p. 25. Manufacturer data.
      “Qty per cube 352 bricks”
      “Coverage 3.9 bricks”
      “90 mm x 79 mm x 257 mm 3 1/2” x 3 1/8” x 10 1/8””
      “Sq.ft. per cube 90.01”
      “Qty per cube 432 bricks”
      “Sq.ft. per cube 93.49”
      “Allow a 3/8 in. - 10 mm mortar joint in order to obtain nominal dimensions.”
      “90 mm x 57 mm x 290 mm 3 1/2” x 2 1/4” x 11 7/16””
      “A 90 mm x 190 mm x 390 mm 4’’ x 8’’ x 16’’”
      “B 90 mm x 190 mm x 590 mm 4’’ x 8’’ x 24’’”
      Per Permacon's published data, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 4)
    5. SAKRETE Type S Masonry Cement, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “Using proportions suggested, one (1) bag of masonry cement is required to lay 35 to 40 blocks, or 135 bricks, approximately. Type N Masonry Cement 30 KG (66 lb) bag Type S Masonry Cement 33.3 KG (66 lb) bag (p. 1)”
      Per SAKRETE's data sheet, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 5)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.