Ready-Mix Concrete Calculator
HoneyDoMath.com
Enter the size of your pour and get the cubic metres of ready-mix concrete to order, with a waste allowance and the math shown.
A ready-made setup of the Concrete Calculator.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Slab: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; farther with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 18 m² (193.75 ft²)
- Perimeter
- 18 m (59 ft 11/16 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a driveway
3 m³ (3.92 yd³) to order (2.97 m³ exact)
- Concrete in the slab 2.7 m³ (95.35 ft³)
- The same job in bags 213 × 30 kg (66.1 lb) bags
- Cubic metres at the supplier's smallest order 3 m³ (105.94 ft³)
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Ready-mix concrete, 1 m³ (1.31 yd³) 3 m³ (3.92 yd³)
Questions
How much ready-mix concrete do I need?
Multiply the length, width and depth to get the volume, add a waste allowance, and read the total in cubic metres. The calculator shows the amount to order with every step.
Why add a waste allowance?
The volume worked out from your sizes is a starting figure. The allowance is added once, to the total, and you can change it to suit your job.
Can I work out the same job in bags?
Yes. The example on this page shows the same job in bags of mix, using the maker's own yield, with the count rounded up once.
How much does a cubic metre of ready-mix cost?
Your supplier sets the price, and it changes with the mix, the delivery and any short-load charge, so this page does not give one. Ask for the price per cubic metre and multiply it by the amount to order.
Worked example: a driveway
Show the steps
- Slab area 6 m (19 ft 8 1/4 in) × 3 m (9 ft 10 1/8 in) = 18 m² (193.75 ft²)
- Slab volume 18 m² (193.75 ft²) × 150 mm (5 7/8 in) (0.15 m) = 2.7 m³ (95.35 ft³)
- Add the waste allowance 2.7 m³ (95.35 ft³) + 10% = 2.97 m³ (104.88 ft³)
- Round up once, to the supplier's smallest order 2.97 m³ (104.88 ft³) = 3 m³ (105.94 ft³)
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance (your own figure) | 10% | |
| Default Your own figure, not a sourced one. 10% is only the starting value; set the allowance you want. | ||
| Yield of the 30 kg bag | approx. 0.014 m³ (0.49 ft³, converted)[1] | |
| One 30 kg bag of SAKRETE Concrete Mix (Sika Canada) yields approximately 0.014 m³. | ||
| Supplier's smallest order, in cubic metres | 0.25 m³ (8.83 ft³, converted) | |
| Default Suppliers sell loose material in set amounts. This amount is a typed example: check your supplier. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Common jobs
Ready-mix concrete to order for common jobs
| Job (length × width × depth) | Concrete to order |
|---|---|
| 2.4 m × 1.8 m × 100 mm | 0.48 m³ (16.78 ft³) |
| 6 m × 3 m × 150 mm | 2.97 m³ (104.88 ft³) |
| 10 m × 500 mm × 300 mm | 1.65 m³ (58.27 ft³) |
Each figure includes the waste allowance in the assumptions above, added once to the total.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Sources (1)
-
SAKRETE Concrete Mix, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read.
Manufacturer data.
“30 KG (66 lb) yields approximately 0.014 m3 (1/2 ft3).”
Per SAKRETE's data sheet, checked 13 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.
Sources
- [1] SAKRETE, SAKRETE Concrete Mix, product data sheet (Canada). Checked 13 November 2026. https://can.sika.com/dam/dms/ca01/i/Sakrete%20Concrete%20Mix_pds-en.pdf