Concrete Cost Calculator

Enter the size of a pour and get the bags and the cubic metres of ready-mix for it. Your own prices go in the panel below: the page knows none and keeps none.

Estimates for planning, not professional advice. Read the full notice.

Pour size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4 metres, 13 feet 1 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 metres, 9 feet 10 and 1 eighth inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 100 millimetres, 3 and 15 sixteenths inches

Example: a slab, bags and ready-mix

95 30 kg (66.1 lb) bags

  • Concrete in the slab 1.2 m³ (42.38 ft³)
  • To mix, with the allowance for waste 1.32 m³ (46.62 ft³)
  • Ready-mix to order, with the allowance for waste 1.32 m³ (46.62 ft³)
  • Concrete mix, 30 kg (66.1 lb) bag 95
  • Ready-mix concrete, 1 m³ (1.31 yd³) 1.5 m³ (1.96 yd³)

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Your prices

    Type your own prices. They stay on this device: nothing is stored or sent, and this page has no price of its own to start from. A blank box is no price, not zero.

    From your own receipt or shelf, for the bag chosen above.

    Ask your supplier.

    Ask your supplier. Blank means no smallest order.

    Ask your supplier. Blank means none.

    Ask your supplier.

    Ask your supplier. Charged once when the order is under the minimum load.

    Pump, fuel or anything else your supplier adds.

    Ask your supplier. Blank counts one truck.

    Questions

    Is it cheaper to mix bags or buy ready-mix?

    The panel shows both totals from the prices you type, and the difference between them, for the pour you entered. It holds no price of its own, so the answer is in your numbers.

    What is a short-load fee?

    A flat fee some suppliers add when an order is under their minimum load. It is an input in the panel; ask your supplier whether one applies.

    How does the break-even work?

    It finds the cubic metres at which the two totals are equal, from the prices and fees you typed, and says so when ready-mix is higher or lower at every size.

    Worked example: a slab, bags and ready-mix

    Show the steps
    1. Slab volume 4 m (13 ft 1 1/2 in) × 3 m (9 ft 10 1/8 in) × 100 mm (3 15/16 in) = 1.2 m³ (42.38 ft³)
    2. Add the allowance for waste once 1.2 m³ (42.38 ft³) + 10% = 1.32 m³ (46.62 ft³)
    3. Divide by the volume of one bag 1.32 m³ (46.62 ft³) ÷ approx. 0.014 m³ (0.49 ft³, converted)[1] = 94.29 bags
    4. Round up once, to whole bags 94.29 bags = 95 × 30 kg (66.1 lb) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Concrete allowance for waste 10%
    Default A typed allowance, not a source's figure: no hidden extra. Ten per cent is the starting example; ask your supplier.
    Volume of one bag of QUIKRETE Concrete Mix 25 kg 12.18 L (0.43 ft³, as published)[2]
    Target Products prints one 25 kg bag of QUIKRETE Concrete Mix as 0.43 ft³.
    Volume of one bag of QUIKRETE Concrete Mix 30 kg 14.72 L (0.52 ft³, as published)[2]
    Target Products prints one 30 kg bag of QUIKRETE Concrete Mix as 0.52 ft³.
    Volume of one bag of SAKRETE Concrete Mix 30 kg approx. 0.014 m³ (0.49 ft³, converted)[1]
    One 30 kg bag of SAKRETE Concrete Mix (Sika Canada) yields approximately 0.014 m³.
    Volume of one bag of SAKRETE Fast Set 30 kg approx. 0.014 m³ (0.49 ft³, converted)[3]
    One 30 kg bag of SAKRETE Fast Set (Sika Canada) yields approximately 0.014 m³; the sheet adds about 2.3 L of water per bag.
    Supplier's smallest order, in cubic metres 0.5 m³ (17.66 ft³, converted)
    Default Suppliers set a smallest order for ready-mix. This figure is a typed example: ask your supplier.

    Bags and cubic metres for common pours

    Concrete with the allowance for waste and bags of the first mix in the list for common slabs, quantities only

    Concrete with the allowance for waste and bags of the first mix in the list for common slabs, quantities only
    Pour (length × width × thickness)Concrete with the allowance for wasteBags
    2.4 m × 1.8 m × 10 cm 0.48 m³ (16.78 ft³)34 × 30 kg (66.1 lb) bags
    5 m × 1 m × 7.5 cm 0.41 m³ (14.57 ft³)30 × 30 kg (66.1 lb) bags
    4 m × 3 m × 10 cm 1.32 m³ (46.62 ft³)95 × 30 kg (66.1 lb) bags
    6 m × 3 m × 15 cm 2.97 m³ (104.88 ft³)213 × 30 kg (66.1 lb) bags

    Quantities only: the amounts of money come from you, in the panel above. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers.

    Sources (3)

    1. SAKRETE Concrete Mix, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “30 KG (66 lb) yields approximately 0.014 m3 (1/2 ft3).”
      Per SAKRETE's data sheet, checked 13 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. QUIKRETE Concrete Mix (Target Products product page) (opens in new tab), Target Products Ltd. (QUIKRETE Canada), Product page, undated. Manufacturer data.
      “25 kg (55 lb) bag = 0.43 ft3.”
      “30 kg (66 lb) bag = 0.52 ft3.”
      Per QUIKRETE's product page, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
    3. SAKRETE Fast Set, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “30 KG (66 lb) yields approximately 0.014 m3 (1/2 ft3).”
      “Add approximately 2.3 L (2.4 qts) of clean water per 30 KG (66 lb) bag, or enough to achieve a workable mix.”
      Per SAKRETE's data sheet, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 3)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.