Brick Calculator

Enter a wall's or a patio's length and height or width and the size of your brick, and get the bricks and the bags of mortar, each rounded up once, with the working shown for an example wall. The brick size and its joint start at an example you replace.

Estimates for planning, not professional advice. Read the full notice.

Wall or patio size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 5 metres, 16 feet 4 and 7 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2 metres, 6 feet 6 and 3 quarters inches

The size on the maker's sheet or the label. The figure shown is an example, not a maker's size: type the one for your unit. A joint typed here is added to the length and the height of the unit.

reads as 290 millimetres, 11 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 57 millimetres, 2 and 1 quarter inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 10 millimetres, 3 eighths of an inch

From the bag or the maker's sheet. The figure shown is an example: type the one for your bag.

reads as 2 square metres, 21.53 square feet

Example: a brick wall

523 bricks

  • Wall area 10 m² (107.64 ft²)
  • Bricks in the wall, exact 497.51 bricks
  • Mortar bags 5 × 30 kg (66.1 lb) bags
  • Brick, bricks 523
  • Mortar bags, 30 kg (66.1 lb) bag 5

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many bricks per square metre?

    It follows from the brick and its joint: one square metre divided by the face of one brick plus its joint. The calculator works it out from the sizes you type, so a different brick or joint gives a different count.

    What size is my brick?

    The size printed by the brick's maker. The size on the page is an example, not a maker's figure; type the one from your brick's sheet or label to count a different brick.

    Worked example: a brick wall

    Show the steps
    1. Wall area: length times height 5 m (16 ft 4 7/8 in) × 2 m (6 ft 6 3/4 in) = 10 m² (107.64 ft²)
    2. Bricks: the wall area divided by the face of one brick and its joint 10 m² (107.64 ft²) ÷ 0.02 m² (0.22 ft²) = 497.51 bricks
    3. Add the waste allowance and round up once 497.51 bricks × 1.05 = 523 bricks
    4. Mortar bags: bricks divided by the bricks one bag lays, rounded up once 497.51 bricks ÷ 99.5 bricks = 5 × 30 kg (66.1 lb) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 5%
    Default Your own allowance. No source is cited for it here; ask your supplier.
    Length of one unit, nominal size 290 mm (11 7/16 in, converted)[1]
    Permacon's guide prints the Melville Norman brick as 90 x 57 x 290 mm, 432 bricks and 93.49 sq.ft. to the cube, laid with a 10 mm joint.
    Height of one unit, nominal size 57 mm (2 1/4 in, converted)[1]
    Permacon's guide prints the Melville Norman brick as 90 x 57 x 290 mm, 432 bricks and 93.49 sq.ft. to the cube, laid with a 10 mm joint.
    Mortar joint (optional) 10 mm (3/8 in, converted)[1]
    Permacon's guide prints the Melville Norman brick as 90 x 57 x 290 mm, 432 bricks and 93.49 sq.ft. to the cube, laid with a 10 mm joint.
    SAKRETE Mortar Mix Type S 30 kg (66.1 lb, converted)[2]
    One 30 kg bag of SAKRETE Mortar Mix Type S (Sika Canada) contains approximately 0.018 m³ of fresh mortar.
    Bomix Mortar Mix (grey) 30 kg (66.1 lb, converted)[3]
    Bomix's page for its grey Mortar Mix prints a 30 kg bag size (no yield is printed).
    SAKRETE Mortar Mix Type N 30 kg (66.1 lb, converted)[4]
    With a 10 mm joint, one 30 kg bag of SAKRETE Mortar Mix Type N yields approximately 33 bricks, 6.5 bricks per 0.10 m².

    Bricks and mortar bags for walls of several heights

    Bricks to buy and bags of mortar for a wall of the example length at five heights

    Bricks to buy and bags of mortar for a wall of the example length at five heights
    Wall heightBricks to buyMortar bags
    1 m 262 bricks3 × 30 kg (66.1 lb) bags
    1.5 m 392 bricks4 × 30 kg (66.1 lb) bags
    2 m 523 bricks5 × 30 kg (66.1 lb) bags
    2.4 m 627 bricks6 × 30 kg (66.1 lb) bags
    3 m 784 bricks8 × 30 kg (66.1 lb) bags

    Each row uses the example brick size and joint, the waste allowance and the bag area above. They are examples: type your own in the calculator. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers.

    Bricks as the maker prints them

    Rows: 2

    Length, height, thickness, bricks per cube and area per cube printed by the maker for each brick

    Length, height, thickness, bricks per cube and area per cube printed by the maker for each brick
    ProductLengthHeightThicknessBricks per cubeArea per cube
    Cardin Brick 257 mm (10 1/8 in, converted)79 mm (3 1/8 in, converted)90 mm (3 9/16 in, converted)3528.36 m² (90.01 ft², as published)
    Melville Norman Brick 290 mm (11 7/16 in, converted)57 mm (2 1/4 in, converted)90 mm (3 9/16 in, converted)4328.69 m² (93.49 ft², as published)

    Figures in the Length, Height, Thickness, Bricks per cube and Area per cube columns are per Permacon's published data, checked 14 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [1]

    Each figure is the one the maker's guide prints for that brick. The calculator reads the brick size from its own fields.

    Masonry cement as the maker prints it

    Rows: 1

    Bag sizes of Type N and Type S masonry cement and the blocks or bricks one bag lays, as the maker's data sheet prints them

    Bag sizes of Type N and Type S masonry cement and the blocks or bricks one bag lays, as the maker's data sheet prints them
    ProductType N bagType S bagBlocks per bag, fromBlocks per bag, toBricks per bag
    SAKRETE Type N / Type S Masonry Cement 30 kg (66.1 lb, converted)33.3 kg (73.4 lb, converted)3540135

    Figures in the Type N bag, Type S bag, Blocks per bag, from, Blocks per bag, to and Bricks per bag columns are per SAKRETE's data sheet, checked 15 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [5]

    The sheet gives the blocks and bricks one bag lays at the proportions it suggests.

    Sources (5)

    1. Masonry product guide 2024 (English) (opens in new tab), Permacon, Masonry product guide 2024, p. 31. Manufacturer data.
      “Qty per cube 432 bricks”
      “Sq.ft. per cube 93.49”
      “Allow a 3/8 in. - 10 mm mortar joint in order to obtain nominal dimensions.”
      “90 mm x 57 mm x 290 mm 3 1/2” x 2 1/4” x 11 7/16””
      “Qty per cube 352 bricks”
      “Coverage 3.9 bricks”
      “90 mm x 79 mm x 257 mm 3 1/2” x 3 1/8” x 10 1/8””
      “Sq.ft. per cube 90.01”
      Per Permacon's published data, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. SAKRETE Mortar Mix Type S, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “30 KG (66 lb) contains approximately 0.018 m3 (0.65 ft3) of fresh mortar.”
      Per SAKRETE's data sheet, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
    3. Bomix Mortar Mix, grey (Bomix product page) (opens in new tab), Bomix (QUIKRETE Companies, Canada), Product page, undated. Manufacturer data.
      “30 kg”
      Per Bomix's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 3)
    4. SAKRETE Mortar Mix Type N, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “With a 10 mm (3/8") joint, 30 KG (66 lb) yields approximately: 33 bricks: 6.5 bricks per 0.10 m² (1 ft2) (p. 1)”
      Per SAKRETE's data sheet, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 4)
    5. SAKRETE Type S Masonry Cement, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “Using proportions suggested, one (1) bag of masonry cement is required to lay 35 to 40 blocks, or 135 bricks, approximately. Type N Masonry Cement 30 KG (66 lb) bag Type S Masonry Cement 33.3 KG (66 lb) bag (p. 1)”
      Per SAKRETE's data sheet, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 5)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.