Drywall Mud Calculator

Enter the drywall area to get the joint compound in pails, the joint tape in rolls and the screws, from three rates you can see and change, rounded up once at each thing you buy.

A ready-made setup of the Drywall Calculator.

Estimates for planning, not professional advice. Read the full notice.

Board and finishing rates

Like 11 m²

reads as 54.12 square metres, 582.54 square feet

Like 40 L

reads as 40.5 litres, 10.7 gallons

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 120 metres, 393 feet 8 and 7 sixteenths inches

Like 11 m²

reads as 0.08 square metres, 0.86 square feet

Example: a bedroom's walls and ceiling

3 10 L pails

  • Joint compound 21.92 L
  • Joint tape 64.944 m (213 ft 7/8 in)
  • Screws 677 screws

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Joint compound pails, 10 L pail 3
  • Joint tape rolls, 50 m (164 ft 1/2 in) roll 2
  • Drywall screws, screws 677

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many litres of joint compound does my drywall area need?

    Multiply the drywall area, in hundreds of square metres, by the litres for each hundred square metres in the field above. The rate starts at an example, so replace it with the coverage on your own label.

    How many pails do I buy?

    Divide the litres by the size of the pail you choose and round up once. A different pail size changes the pails, not the litres.

    How many rolls of tape do I need?

    The tape needed is the drywall area in hundreds of square metres times the metres for each hundred square metres, divided by the length of the roll you choose and rounded up once.

    Worked example: a bedroom's walls and ceiling

    Show the steps
    1. Compound: the drywall area over a hundred square metres, times the rate 54.12 m² (582.54 ft²) ÷ 100 m² (1,076.39 ft²) × 40.5 L = 21.919 L
    2. Pails: divide by the pail and round up once 21.919 L ÷ 10 L = 3 × 10 L pails
    3. Tape: the drywall area over a hundred square metres, times the rate 54.12 m² (582.54 ft²) ÷ 100 m² (1,076.39 ft²) × 120 m (393 ft 8 7/16 in) = 64.944 m (213 ft 7/8 in)
    4. Rolls: divide by the roll and round up once 64.944 m (213 ft 7/8 in) ÷ 50 m (164 ft 1/2 in) = 2 × 50 m (164 ft 1/2 in) rolls

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Joint compound per hundred square metres of drywall 40.5 L per 100 m²[1]
    CGC's submittal sheet for All Purpose Lite drywall compound gives a joint-finishing coverage of approximately 40.5 L per 100 m² of gypsum panels, in a 17 L carton.
    Joint tape per hundred square metres of drywall 120 m per 100 m²[2]
    CGC's data sheet for its paper drywall joint tape gives approximately 120 m of tape per 100 m² of gypsum panels.
    Drywall area per screw 0.08 m² (0.86 ft², converted)
    Default An example rate, not a maker's figure. It is a field above the result: replace it with the rate on your own label.
    Pail size No default
    Default Choose it from the list above the result. Check your label or supplier.
    Tape roll (examples; use your own) length No default
    Default Choose it from the list above the result. Check your label or supplier.

    Sources (2)

    1. Sheetrock Brand All Purpose Lite drywall compound, submittal sheet (CGC, Canada) (opens in new tab), CGC Inc. (USG), Submittal sheet, edition not printed in the text read. Manufacturer data.
      “Coverage: Joint Finishing, approximately 40.5 L/100 m2 (10 gal./1,000 ft.2) of gypsum panels.”
      “Packaging: 17 L (4.5 gal.) carton”
      Per CGC's published data, checked 13 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. Drywall Joint Tape, data sheet (CGC, Canada) (opens in new tab), CGC Inc. (USG), Data sheet, edition not printed in the text read. Manufacturer data.
      “Approx. 120 m/100 m2 (370 ft./1000 ft.2) gypsum panels.”
      “22.9 m (75 ft) Roll 76.2 m (250 ft) Roll 152.4 m (500 ft) Roll”
      “Nom. 52 mm (2-1/16”)”
      “Contain 24 ea. 22.9 m (75') rolls per carton, 20 ea. 76.2 m (250') rolls, or 10 each 152.4 m (500') rolls”
      Per CGC's data sheet, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.