Sand Calculator

Enter the length, width and depth and get the sand to order in cubic metres, rounded up once to the supplier's smallest order, with the math shown for an example. Tonnes and bags are there too, at an example weight and bag sizes you replace with your supplier's.

Estimates for planning, not professional advice. Read the full notice.

Area size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 metres, 9 feet 10 and 1 eighth inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 metres, 9 feet 10 and 1 eighth inches

Enter the depth in millimetres, or type a unit.

reads as 50 millimetres, 1 and 15 sixteenths inches

Example: a sand area

0.5 m³ (0.65 yd³) to order (0.45 m³ exact)

  • Volume in the area 0.45 m³ (15.89 ft³)
  • Cubic metres to order 0.45 m³ (15.89 ft³)
  • Cubic metres at the supplier's smallest order 0.5 m³ (17.66 ft³)
  • Tonnes at the weight above 0.7 t
  • Tonnes at the supplier's smallest order 1 t
  • Sand by the cubic metre, 1 m³ (1.31 yd³) 0.5 m³ (0.65 yd³)

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How much sand do I need?

    Enter the length, width and depth. The calculator multiplies them for the volume, adds the waste allowance once and rounds up once, to the supplier's smallest order in cubic metres.

    How many tonnes is that?

    The calculator multiplies the volume by the weight in the assumptions. That weight is an example, not a figure from a source: replace it with the weight your supplier gives.

    Is anything added for waste?

    No hidden allowance: waste starts at nothing, it is a row you can change, and it is added once.

    Worked example: a sand area

    Show the steps
    1. Area 3 m (9 ft 10 1/8 in) × 3 m (9 ft 10 1/8 in) = 9 m² (96.88 ft²)
    2. Volume at the depth 9 m² (96.88 ft²) × 50 mm (1 15/16 in) (0.05 m) = 0.45 m³ (15.892 ft³)
    3. Add the waste allowance, once 0.45 m³ (15.892 ft³) + 0 per cent waste = 0.45 m³ (15.89 ft³)
    4. Round up once, to the supplier's smallest order 0.45 m³ (15.89 ft³) = 0.5 m³ (17.66 ft³)
    5. Tonnes: multiply by the weight of a cubic metre 0.45 m³ (15.892 ft³) × 1,600 kg/m³ (1.6 t/m³) = 0.7 t
    6. Round up once, to the supplier's smallest tonnage 0.7 t = 1 t
    7. Bags: divide by the bag size, round up once 0.45 m³ (15.892 ft³) ÷ 56 L = 9 × 56 L (1.98 ft³) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Weight of sand, example 1,600 kg/m³ (1.6 t/m³, as published)
    Default An example to replace, not a figure from a source. Ask your supplier for the weight per cubic metre.
    Waste allowance 0%
    Default No hidden allowance. Check your label or supplier.
    Supplier's smallest order in cubic metres 0.25 m³ (8.83 ft³, converted)
    Default Suppliers set a smallest order for loose material. This figure is an example to replace. Ask your supplier.
    Supplier's smallest order in tonnes 0.5 t
    Default Suppliers set a smallest order by weight. This figure is an example to replace. Ask your supplier.
    Bag size in litres (examples; use your own) 56 L
    Default The bag size is printed on the label. The sizes shown are examples, not figures from a source. Check your label.

    Sand by depth

    Cubic metres of sand for the area of the example at four depths, with no waste allowance

    Cubic metres of sand for the area of the example at four depths, with no waste allowance
    DepthCubic metresCubic metres at the supplier's smallest orderBags of the size above
    20 mm (13/16 in) 0.18 m³ (6.36 ft³)0.25 m³ (8.83 ft³)4 bags
    50 mm (1 15/16 in) 0.45 m³ (15.89 ft³)0.5 m³ (17.66 ft³)9 bags
    100 mm (3 15/16 in) 0.9 m³ (31.78 ft³)1 m³ (35.31 ft³)17 bags
    150 mm (5 7/8 in) 1.35 m³ (47.67 ft³)1.5 m³ (52.97 ft³)25 bags

    Each depth is worked out on its own, with the smallest order in the assumptions.

    Sand: sizes the maker prints

    Rows: 1

    The bag size, and the area one bag covers where the maker prints it, for each sand product listed

    The bag size, and the area one bag covers where the maker prints it, for each sand product listed
    ProductPrinted by the maker
    All-Purpose Sand 18 kg (39.7 lb, converted)

    Figures in the Printed by the maker column are per Fafard's product page, checked 15 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [1]

    These are the maker's own figures, shown as printed. The calculator above works from the bag size you choose and uses nothing from this table.

    Sources (1)

    1. All-Purpose Sand (Fafard product page) (opens in new tab), Scotts Fafard, Product page, undated. Manufacturer data.
      “An uncompacted 18 kg bag”
      Per Fafard's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.