Backsplash Tile Calculator

Enter the length and height of the wall strip, any window, hood or outlet cut-outs, and a small tile with its joint, and get the whole tiles and boxes to buy, with a waste allowance you can change.

A ready-made setup of the Tile Calculator.

Estimates for planning, not professional advice. Read the full notice.

Backsplash and tile

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 metres, 9 feet 10 and 1 eighth inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 600 millimetres, 1 foot 11 and 5 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 150 millimetres, 5 and 7 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 75 millimetres, 2 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2 millimetres, 1 sixteenth of an inch

Example: a kitchen backsplash

4 boxes of tiles

  • Area to tile 1.8 m² (19.38 ft²)
  • Tiles to cover the area 153.79 tiles
  • Tiles with the waste allowance 170 tiles

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Tiles, by the box, boxes of tiles 4

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    Do outlets and windows come off the tile count?

    Yes, if you give their sizes. Fill in a cut-out's width and height and pick the number of outlet cut-outs, and that area comes off the strip before the tiles are counted. A cut-out larger than the strip is refused.

    Does the joint matter for small tiles?

    More than for large ones. Each small tile takes its own size plus the joint, so even a narrow joint changes the count noticeably. The calculator uses the joint you type.

    Worked example: a kitchen backsplash

    Show the steps
    1. Strip area: length times height 3 m (9 ft 10 1/8 in) × 600 mm (1 ft 11 5/8 in) = 1.8 m² (19.38 ft²)
    2. Area one tile takes, joint included 152 mm (6 in) × 77 mm (3 1/16 in) = 0.0117 m² (0.126 ft²)
    3. Tiles to cover the area 1.8 m² (19.38 ft²) ÷ 0.0117 m² (0.126 ft²) = 153.79 tiles
    4. Add the waste allowance once, then round up once to whole tiles 153.79 tiles × 1.1 = 170 tiles
    5. Boxes: divide by the tiles in a box, round up once 170 tiles ÷ 44 = 4 boxes of tiles

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Tile waste allowance 10%
    Default A typical allowance, not a figure from a standard. Change it to the allowance you want; check your tile label or supplier.
    Grout joint width 2 mm (1/16 in, converted)
    Default Your own joint width: check the spacing on your tile label or with your supplier.
    Tiles per box 44 tiles
    Default The tiles per box are on your tile label or your supplier's sheet; the list offers common counts.