Wallpaper Calculator

Enter a room's sizes and the roll's width, length and pattern repeat from its label, and get the strips, the drop length with the repeat counted and the rolls to order, with how many the area method falls short by.

Estimates for planning, not professional advice. Read the full notice.

Room and roll

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.2 metres, 13 feet 9 and 3 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.6 metres, 11 feet 9 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.5 metres, 8 feet 2 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 530 millimetres, 1 foot 8 and 7 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 10 metres, 32 feet 9 and 11 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 100 millimetres, 3 and 15 sixteenths inches

Like 11 m²

reads as 4.77 square metres, 51.34 square feet

Example: a room papered all around

10 rolls of wallpaper

  • Strips across the walls 30 strips
  • Drop: the cut length of one strip 2.6 m (8 ft 6 3/8 in)
  • Drops from one roll 3 drops
  • Rolls by area on the net wall area 7 rolls
  • Rolls the area method falls short by 3 rolls

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Wallpaper rolls, wallpaper roll, 530 mm × 10 m 10

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many rolls of wallpaper do I need for a room?

    Enter the room's sizes and the roll's size from its label. The calculator counts strips across the walls, cuts each drop to the wall height plus the trim and the repeat, and rounds the rolls up once.

    What is a pattern repeat?

    It is the distance down the roll before the pattern starts again, printed on the label. Each drop is cut to a whole number of repeats so neighbouring strips line up, which is why a repeat can add a roll.

    Why not divide the wall area by the roll area?

    Strips are cut whole from the roll and each drop loses some at the top, so a roll holds fewer strips than its area suggests. The example shows how many rolls the area method falls short by.

    Worked example: a room papered all around

    Show the steps
    1. Strips: the distance around the room divided by the roll width 15.6 m (51 ft 2 3/16 in) ÷ 530 mm (1 ft 8 7/8 in) = 29.43 strips
    2. Round up to whole strips 29.43 strips = 30 strips
    3. Drop: the wall height plus the trim 2.5 m (8 ft 2 7/16 in) + 100 mm (3 15/16 in) = 2.6 m (8 ft 6 3/8 in)
    4. Drops from one roll, whole drops only 10 m (32 ft 9 11/16 in) ÷ 2.6 m (8 ft 6 3/8 in) = 3.85 drops
    5. Rolls: strips divided by the drops one roll gives, rounded up once 30 strips ÷ 3 drops = 10 rolls of wallpaper

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Trim, top and bottom together 100 mm (3 15/16 in, converted)
    Default A typed example, not a maker's figure. Check the maker's sheet or your supplier and type your own.