River Rock Calculator

Enter the length, width and depth and get the river rock to order in cubic metres, rounded up once to the supplier's smallest order, with the math shown for an example. Tonnes need the weight your supplier gives.

A ready-made setup of the Gravel Calculator.

Estimates for planning, not professional advice. Read the full notice.

Bed size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4 metres, 13 feet 1 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2 metres, 6 feet 6 and 3 quarters inches

Enter the depth in millimetres, or type a unit.

reads as 80 millimetres, 3 and 1 eighth inches

Ask your supplier for the weight per cubic metre. Check your label or supplier.

Example: a bed of river rock

0.75 m³ (0.98 yd³) to order (0.64 m³ exact)

  • Volume in the area 0.64 m³ (22.6 ft³)
  • Cubic metres to order 0.64 m³ (22.6 ft³)
  • Cubic metres at the supplier's smallest order 0.75 m³ (26.49 ft³)
  • Bags of the size above 12 × 56 L (1.98 ft³) bags
  • River rock by the cubic metre, 1 m³ (1.31 yd³) 0.75 m³ (0.98 yd³)

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How much river rock do I need?

    Enter the length, width and depth. The calculator multiplies them for the volume, adds the waste allowance once and rounds up once, to the supplier's smallest order in cubic metres.

    Why does the calculator not give tonnes straight away?

    No weight is filled in, because none is taken from a source. Enter the weight per cubic metre your supplier gives, choose tonnes, and the order is worked out from it.

    Is anything added for waste?

    No hidden allowance: waste starts at nothing, it is a row you can change, and it is added once.

    Worked example: a bed of river rock

    Show the steps
    1. Area 4 m (13 ft 1 1/2 in) × 2 m (6 ft 6 3/4 in) = 8 m² (86.11 ft²)
    2. Volume at the depth 8 m² (86.11 ft²) × 80 mm (3 1/8 in) (0.08 m) = 0.64 m³ (22.601 ft³)
    3. Add the waste allowance, once 0.64 m³ (22.601 ft³) + 0 per cent waste = 0.64 m³ (22.6 ft³)
    4. Round up once, to the supplier's smallest order 0.64 m³ (22.6 ft³) = 0.75 m³ (26.49 ft³)
    5. Bags: divide by the bag size, round up once 0.64 m³ (22.601 ft³) ÷ 56 L = 12 × 56 L (1.98 ft³) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 0%
    Default No hidden allowance. Check your label or supplier.
    Supplier's smallest order in cubic metres 0.25 m³ (8.83 ft³, converted)
    Default Suppliers set a smallest order for loose material. This figure is an example to replace. Ask your supplier.
    Supplier's smallest order in tonnes 0.5 t
    Default Suppliers set a smallest order by weight. This figure is an example to replace. Ask your supplier.
    Bag size in litres (examples; use your own) 56 L
    Default The bag size is printed on the label. The sizes shown are examples, not figures from a source. Check your label.

    River rock by depth

    Cubic metres of river rock for the area of the example at four depths, with no waste allowance

    Cubic metres of river rock for the area of the example at four depths, with no waste allowance
    DepthCubic metresCubic metres at the supplier's smallest orderBags of the size above
    20 mm (13/16 in) 0.16 m³ (5.65 ft³)0.25 m³ (8.83 ft³)3 bags
    50 mm (1 15/16 in) 0.4 m³ (14.13 ft³)0.5 m³ (17.66 ft³)8 bags
    100 mm (3 15/16 in) 0.8 m³ (28.25 ft³)1 m³ (35.31 ft³)15 bags
    150 mm (5 7/8 in) 1.2 m³ (42.38 ft³)1.25 m³ (44.14 ft³)22 bags

    Each depth is worked out on its own, with the smallest order in the assumptions.

    River rock: sizes the maker prints

    Rows: 2

    The bag size, and the area one bag covers where the maker prints it, for each river rock product listed

    The bag size, and the area one bag covers where the maker prints it, for each river rock product listed
    ProductPrinted by the maker
    River Stone 18 kg (39.7 lb, converted)
    River Stone 0.2 m² (2.15 ft², converted)

    Figures in the Printed by the maker column are per Fafard's product page, checked 15 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [1]

    These are the maker's own figures, shown as printed. The calculator above works from the bag size you choose and uses nothing from this table.

    Sources (1)

    1. River Stone (Fafard product page) (opens in new tab), Scotts Fafard, Product page, undated. Manufacturer data.
      “FORMAT 18 kg ; One 18 kg bag allows to cover approximately 0.20 m² (2 ft²)”
      Per Fafard's product page, checked 15 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.