Retaining Wall Block Calculator

Enter a wall's length and height and the size of your block and cap, and get the blocks by whole courses and the caps along the top, rounded up once, with the working shown for an example wall. It counts blocks and caps only.

Estimates for planning, not professional advice. Read the full notice.

Wall, block and cap sizes

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 6 metres, 19 feet 8 and 1 quarter inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 1 metre, 3 feet 3 and 3 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 400 millimetres, 1 foot 3 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 200 millimetres, 7 and 7 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 400 millimetres, 1 foot 3 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 50 millimetres, 1 and 15 sixteenths inches

Example: a garden retaining wall

79 blocks

  • Courses of block under the cap 5 courses
  • Laid height of the blocks 1 m (3 ft 3 3/8 in)
  • Blocks if the cut pieces were all reused, exact 75 blocks
  • Whole blocks per course times courses (the count the buy uses) 75 blocks
  • Caps to buy 16 caps

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Retaining wall block, blocks 79
  • Wall cap, caps 16

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many retaining wall blocks do I need?

    Type the wall's length and height and the size of your block. The calculator counts the courses up to the cap, the whole blocks across the wall for those courses and the caps along the top, each rounded up once with your waste allowance.

    Does it size the wall or its footing?

    No. It counts blocks and caps from the sizes you type. How high a wall may be built, its drainage and its footing are for an engineer or your local building department, not this calculator.

    Worked example: a garden retaining wall

    Show the steps
    1. Height under the cap: wall height less the cap height 1 m (3 ft 3 3/8 in) − 50 mm (1 15/16 in) = 950 mm (3 ft 1 3/8 in)
    2. Courses: that height divided by one block's height 950 mm (3 ft 1 3/8 in) ÷ 200 mm (7 7/8 in) = 4.75 courses
    3. A course is a whole row, so round up 4.75 courses = 5 courses
    4. Whole blocks in one course: wall length over one block's length, rounded up 6 m (19 ft 8 1/4 in) ÷ 400 mm (1 ft 3 3/4 in) = 15 blocks
    5. Whole blocks: courses times blocks in one course 5 courses × 15 blocks = 75 blocks
    6. Add the waste allowance and round up once 75 blocks × 1.05 = 79 blocks
    7. Caps: whole caps along the wall, with waste, rounded up once 15 caps × 1.05 = 16 caps

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 5%
    Default Your own allowance. No source is cited for it here; ask your supplier.

    Courses and laid height against the wall height

    Whole courses, laid height, blocks and caps for the example wall at several wall heights

    Whole courses, laid height, blocks and caps for the example wall at several wall heights
    Wall heightCoursesLaid height of the blocksWhole blocks per courseBlocks to buyCaps to buy
    1 m 5 courses1 m (3 ft 3 3/8 in)15 blocks79 blocks16 caps
    1.5 m 8 courses1.6 m (5 ft 3 in)15 blocks126 blocks16 caps
    2 m 10 courses2 m (6 ft 6 3/4 in)15 blocks158 blocks16 caps
    2.4 m 12 courses2.4 m (7 ft 10 1/2 in)15 blocks189 blocks16 caps
    3 m 15 courses3 m (9 ft 10 1/8 in)15 blocks237 blocks16 caps

    A course is a whole row, so the laid height can differ from the height typed. The block and cap sizes and the waste allowance are examples.

    Wall blocks as the maker prints them

    Rows: 1

    The wall block's dimensions as the maker's page prints them, in millimetres

    The wall block's dimensions as the maker's page prints them, in millimetres
    ProductDimensions, as printed
    Techo-Bloc Systema Wall 356 × 254 × 180

    Figures in the Dimensions, as printed column are per Techo-Bloc's product page, checked 14 Nov 2026.

    Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

    Source: [1]

    The page does not label which dimension is the length, the depth or the height: the three are in the order printed.

    Sources (1)

    1. Systema Wall (Techo-Bloc product page) (opens in new tab), Techo-Bloc, Product page, undated. Manufacturer data.
      “14 × 10 × 7 1⁄16 in (356 × 254 × 180 mm)”
      Per Techo-Bloc's product page, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.