Concrete Pier Calculator

Enter the diameter and depth of a round concrete pier, add a flared base if there is one, and get the bags for each pier and for all of them, with the working shown. Add piers with the copies control. Volume only.

A ready-made setup of the Concrete Calculator.

Estimates for planning, not professional advice. Read the full notice.

Pier size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 300 millimetres, 11 and 13 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 1.2 metres, 3 feet 11 and 1 quarter inches

At least the diameter.

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Example: one concrete pier

7 30 kg (66.1 lb) bags

  • Concrete in the pier 0.08 m³ (3 ft³)
  • To mix, with the allowance for waste 0.09 m³ (3.3 ft³)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Concrete mix, 30 kg (66.1 lb) bag 7

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many bags of concrete for a pier?

    Enter the diameter and the depth of the pier. The table on this page gives the concrete and the bags at common diameters and two depths, and the calculator counts any size.

    How deep does a pier go?

    The calculator takes the depth you enter. The depth a pier needs depends on the ground, so ask your local building department.

    Is a flared base included?

    Only when you switch it on. A flared base (a belled pier) is the widened part under the shaft; its volume is added once to the shaft and never counted twice.

    Worked example: one concrete pier

    Show the steps
    1. Area of the circle 3.1416 × 300 mm (11 13/16 in) × 300 mm (11 13/16 in) ÷ 4 = 0.0707 m² (0.7609 ft²)
    2. Volume of the pier 0.0707 m² (0.7609 ft²) × 1.2 m (3 ft 11 1/4 in) = 0.0848 m³ (2.9955 ft³)
    3. Add the allowance for waste once 0.0848 m³ (2.9955 ft³) + 10% = 0.0933 m³ (3.295 ft³)
    4. Divide by the volume of one bag 0.0933 m³ (3.295 ft³) ÷ approx. 0.014 m³ (0.49 ft³, converted)[1] = 6.66 bags
    5. Round up once, to whole bags 6.66 bags = 7 × 30 kg (66.1 lb) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Concrete allowance for waste 10%
    Default A typed allowance, not a source's figure: no hidden extra. Ten per cent is the starting example; ask your supplier.
    Volume of one bag of QUIKRETE Concrete Mix 25 kg 12.18 L (0.43 ft³, as published)[2]
    Target Products prints one 25 kg bag of QUIKRETE Concrete Mix as 0.43 ft³.
    Volume of one bag of QUIKRETE Concrete Mix 30 kg 14.72 L (0.52 ft³, as published)[2]
    Target Products prints one 30 kg bag of QUIKRETE Concrete Mix as 0.52 ft³.
    Volume of one bag of SAKRETE Concrete Mix 30 kg approx. 0.014 m³ (0.49 ft³, converted)[1]
    One 30 kg bag of SAKRETE Concrete Mix (Sika Canada) yields approximately 0.014 m³.
    Volume of one bag of SAKRETE Fast Set 30 kg approx. 0.014 m³ (0.49 ft³, converted)[3]
    One 30 kg bag of SAKRETE Fast Set (Sika Canada) yields approximately 0.014 m³; the sheet adds about 2.3 L of water per bag.

    Concrete in a round pier, by diameter and depth

    Concrete in one filled round pier and the bags for it, by diameter, at two depths, with the allowance for waste added

    Concrete in one filled round pier and the bags for it, by diameter, at two depths, with the allowance for waste added
    DiameterConcrete at 1 m deepBags at 1 m deepConcrete at 1.5 m deepBags at 1.5 m deep
    200 mm (7 7/8 in) 0.03 m³ (1.11 ft³)3 × 30 kg (66.1 lb) bags0.05 m³ (1.66 ft³)4 × 30 kg (66.1 lb) bags
    250 mm (9 13/16 in) 0.05 m³ (1.73 ft³)4 × 30 kg (66.1 lb) bags0.07 m³ (2.6 ft³)6 × 30 kg (66.1 lb) bags
    300 mm (11 13/16 in) 0.07 m³ (2.5 ft³)6 × 30 kg (66.1 lb) bags0.11 m³ (3.74 ft³)9 × 30 kg (66.1 lb) bags
    400 mm (1 ft 3 3/4 in) 0.13 m³ (4.44 ft³)10 × 30 kg (66.1 lb) bags0.19 m³ (6.66 ft³)15 × 30 kg (66.1 lb) bags
    500 mm (1 ft 7 11/16 in) 0.2 m³ (6.93 ft³)16 × 30 kg (66.1 lb) bags0.29 m³ (10.4 ft³)24 × 30 kg (66.1 lb) bags

    The diameters are examples you replace with your own. A flared base at the bottom adds its own volume; the calculator takes it as an option. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers.

    Sources (3)

    1. SAKRETE Concrete Mix, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “30 KG (66 lb) yields approximately 0.014 m3 (1/2 ft3).”
      Per SAKRETE's data sheet, checked 13 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 1)
    2. QUIKRETE Concrete Mix (Target Products product page) (opens in new tab), Target Products Ltd. (QUIKRETE Canada), Product page, undated. Manufacturer data.
      “25 kg (55 lb) bag = 0.43 ft3.”
      “30 kg (66 lb) bag = 0.52 ft3.”
      Per QUIKRETE's product page, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 2)
    3. SAKRETE Fast Set, product data sheet (Canada) (opens in new tab), Sika Canada Inc. (SAKRETE), Product data sheet, edition not printed in the text read. Manufacturer data.
      “30 KG (66 lb) yields approximately 0.014 m3 (1/2 ft3).”
      “Add approximately 2.3 L (2.4 qts) of clean water per 30 KG (66 lb) bag, or enough to achieve a workable mix.”
      Per SAKRETE's data sheet, checked 14 Nov 2026. Figures and codes change; verify with the source. Back to where this is used (Source 3)

    These are summaries of what the sources say, not professional advice. Building codes and product data change. Check with your local building department and the product label about your own project.